shadowsocks c

11 KiB

Raw Blame History

shadowsocks-libev

Intro

Shadowsocks-libev is a lightweight secured scoks5 proxy for embedded devices and low end boxes.

It is a port of shadowsocks created by @clowwindy maintained by @madeye and @linusyang.

Current version: 1.4.2 |

Changelog

1.4.2 -- Sun, 05 Jan 2014 10:05:29 +0900

Fix the UDP relay issues.
Add syslog support.

1.4.1 -- Tue, 12 Nov 2013 03:57:21 +0000

Add multi-port support.
Add PolarSSL support by @linusyang.

1.4.0 -- Sun, 08 Sep 2013 02:20:40 +0000

Add standard socks5 udp support.

1.3.3 -- Fri, 21 Jun 2013 09:59:20 +0800

Provide more info in verbose mode.

1.3.2 -- Sun, 09 Jun 2013 09:52:31 +0000

Fix some ciphers by @linusyang.

1.3.1 -- Tue, 04 Jun 2013 00:56:17 +0000

Support more cihpers: camellia, idea, rc2 and seed.

1.3 -- Thu, 16 May 2013 10:51:15 +0800

Able to bind connections to specific interface
Support more ciphers: aes-128-cfb, aes-192-cfb, aes-256-cfb, bf-cfb, cast5-cfb, des-cfb

1.2 -- Tue, 07 May 2013 14:10:33 +0800

Close timeouted TCP connections
Fix a high load issue

1.1 -- Wed, 10 Apr 2013 12:11:36 +0800

Fix a IPV6 resolve issue

1.0 -- Sat, 06 Apr 2013 16:59:15 +0800

Initial release

Features

Shadowsocks-libev is writen in pure C and only depends on libev and openssl or polarssl.

In normal usage, the memory consumption is about 600KB and the CPU utilization is no more than 5% on a low-end router (Buffalo WHR-G300N V2 with a 400MHz MIPS CPU, 32MB memory and 4MB flash).

Installation

Notes about PolarSSL

Default crypto library is OpenSSL. To build against PolarSSL, specify --with-crypto-library=polarssl and --with-polarssl=/path/to/polarssl when running ./configure.
PolarSSL 1.2.5 or newer is required. Currently, PolarSSL does NOT support CAST5-CFB, DES-CFB, IDEA-CFB, RC2-CFB and SEED-CFB.
RC4 is only support by PolarSSL 1.3.0 or above.

Debian & Ubuntu

Add either of the following lines to your /etc/apt/sources.list

# Debian Wheezy, Ubuntu 12.04 or any distribution with libssl > 1.0.1
deb http://shadowsocks.org/debian wheezy main

# Debian Squeeze, Ubuntu 11.04, or any distribution with libssl > 0.9.8, but < 1.0.0
deb http://shadowsocks.org/debian squeeze main

Then,

sudo apt-get update
sudo apt-get install shadowsocks

# Edit the configuration
sudo vim /etc/shadowsocks/config.json

# Start the service
sudo /etc/init.d/shadowsocks start

CentOS

Install the compile tools

yum install -y gcc automake autoconf libtool make build-essential autoconf libtool gcc
yum install -y curl curl-devel zlib-devel openssl-devel perl perl-devel cpio expat-devel gettext-devel

Compile and install

./configure && make
make install

Create config.json

mkdir /etc/shadowsocks
vi /etc/shadowsocks/config.json

Then fill your infomation

Create the service file

vi /etc/rc.d/init.d/shadowsocks

Paste below code in vi

#!/bin/sh
### BEGIN INIT INFO
# Provides:          shadowsocks
# Required-Start:    $network $local_fs $remote_fs
# Required-Stop:     $remote_fs
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: lightweight secured scoks5 proxy
# Description:       Shadowsocks-libev is a lightweight secured 
#                    scoks5 proxy for embedded devices and low end boxes.
#                    
### END INIT INFO

# Author: Vinna

# Source function library.
. /etc/rc.d/init.d/functions

# Source networking configuration.
. /etc/sysconfig/network

NAME=shadowsocks
DAEMON=/usr/local/bin/ss-server
prog=$(basename $DAEMON)

PIDFILE=/var/run/$NAME/$prog.pid
CONFFILE=/etc/$NAME/config.json

lockfile=/var/lock/subsys/$NAME/$prog

start()
{
    echo -n $"Starting $prog: "
    daemon $DAEMON -c $CONFFILE -f $PIDFILE
    retval=$?
    echo
    [ $retval -eq 0 ] && touch $lockfile
    return $retval
}

stop()
{
	echo -n $"Stopping $prog: "
	killproc -p $PIDFILE $DAEMON
	RETVAL=$?
	[ $RETVAL -eq 0 ] && rm -f $lockfile
	echo
	return $retval
}

restart() {
    stop
    start
}

rh_status() {
    status $prog
}

rh_status_q() {
    rh_status >/dev/null 2>&1
}

case "$1" in
    start)
        rh_status_q && exit 0
        $1
        ;;
    stop)
        rh_status_q || exit 0
        $1
        ;;
    restart)
        $1
        ;;
    status)
        rh_status
        ;;
    condrestart|try-restart)
        rh_status_q || exit 0
            ;;
    *)
        echo $"Usage: $0 {start|stop|status|restart|condrestart|try-restart}"
        exit 2
esac

Then save and quit vi

Ctreate some folder

mkdir /var/run/shadowsocks
mkdir /var/lock/subsys/shadowsocks

Then start it

service shadowsocks start

Linux

For Unix-like systems, especially Debian-based systems, e.g. Ubuntu, Debian or Linux Mint, you can build the binary like this:

sudo apt-get install build-essential autoconf libtool libssl-dev
./configure && make
sudo make install

FreeBSD

su
cd /usr/ports/net/shadowsocks-libev
make install

Edit your config.json file. By default, it's located in /usr/local/etc/shadowsocks-libev

To enable shadowsocks-libev, add the following rc variable to your /etc/rc.conf file.

shadowsocks_libev_enable="YES"

Start the shadowsocks server:

service shadowsocks_libev start

OpenWRT

# At OpenWRT build root
pushd package
git clone https://github.com/madeye/shadowsocks-libev.git
popd

# Enable shadowsocks-libev in network category 
make menuconfig

# Optional
make -j

# Build the package
make V=99 package/shadowsocks-libev/openwrt/compile

Windows

For Windows, use either MinGW (msys) or Cygwin to build. At the moment, only ss-local is supported to build against MinGW (msys).

If you are using MinGW (msys), please download OpenSSL or PolarSSL source tarball to the home directory of msys, and build it like this (may take a few minutes):

OpenSSL

tar zxf openssl-1.0.1e.tar.gz
cd openssl-1.0.1e
./config --prefix="$HOME/prebuilt" --openssldir="$HOME/prebuilt/openssl"
make && make install

PolarSSL

tar zxf polarssl-1.3.2-gpl.tgz
cd polarssl-1.3.2
make lib WINDOWS=1
make install DESTDIR="$HOME/prebuilt"

Then, build the binary using the commands below, and all .exe files will be built at $HOME/ss/bin:

OpenSSL

./configure --prefix="$HOME/ss" --with-openssl="$HOME/prebuilt"
make && make install

PolarSSL

./configure --prefix="$HOME/ss" --with-crypto-library=polarssl --with-polarssl=$HOME/prebuilt
make && make install

Usage

usage:

ss-[local|redir|server]
      -s <server_host>           host name or ip address of your remote server
      -p <server_port>           port number of your remote server
      -l <local_port>            port number of your local server
      -k <password>              password of your remote server

      [-m <encrypt_method>]      encrypt method, supporting table, rc4,
                                 aes-128-cfb, aes-192-cfb, aes-256-cfb,
                                 bf-cfb, camellia-128-cfb, camellia-192-cfb,
                                 camellia-256-cfb, cast5-cfb, des-cfb,
                                 idea-cfb, rc2-cfb and seed-cfb
      [-f <pid_file>]            valid path to the pid file
      [-t <timeout>]             socket timeout in seconds
      [-c <config_file>]         json format config file

      [-i <interface>]           specific network interface to bind,
                                 only available in local and server modes
      [-b <local_address>]       specific local address to bind,
                                 only available in local and redir modes
      [-u]                       udprelay mode to supprot udp traffic
                                 only available in local and server modes
      [-v]                       verbose mode, debug output in console

notes:

    ss-redir provides a transparent proxy function and only works on the 
    Linux platform with iptables.

Advanced usage

The latest shadowsocks-libev has provided a redir mode. You can configure your linux based box or router to proxy all tcp traffic transparently.

# Create new chain
root@Wrt:~# iptables -t nat -N SHADOWSOCKS

# Ignore your shadowsocks server's addresses
# It's very IMPORTANT, just be careful.
root@Wrt:~# iptables -t nat -A SHADOWSOCKS -d 123.123.123.123 -j RETURN

# Ignore LANs and any other addresses you'd like to bypass the proxy
# See Wikipedia and RFC5735 for full list of reserved networks.
# See ashi009/bestroutetb for a highly optimized CHN route list.
root@Wrt:~# iptables -t nat -A SHADOWSOCKS -d 0.0.0.0/8 -j RETURN
root@Wrt:~# iptables -t nat -A SHADOWSOCKS -d 10.0.0.0/8 -j RETURN
root@Wrt:~# iptables -t nat -A SHADOWSOCKS -d 127.0.0.0/8 -j RETURN
root@Wrt:~# iptables -t nat -A SHADOWSOCKS -d 169.254.0.0/16 -j RETURN
root@Wrt:~# iptables -t nat -A SHADOWSOCKS -d 172.16.0.0/12 -j RETURN
root@Wrt:~# iptables -t nat -A SHADOWSOCKS -d 192.168.0.0/16 -j RETURN
root@Wrt:~# iptables -t nat -A SHADOWSOCKS -d 224.0.0.0/4 -j RETURN
root@Wrt:~# iptables -t nat -A SHADOWSOCKS -d 240.0.0.0/4 -j RETURN

# Anything else should be redirected to shadowsocks's local port
root@Wrt:~# iptables -t nat -A SHADOWSOCKS -p tcp -j REDIRECT --to-ports 12345

# Apply the rules
root@Wrt:~# iptables -t nat -A OUTPUT -p tcp -j SHADOWSOCKS

# Start the shadowsocks-redir
root@Wrt:~# ss-redir -c /etc/config/shadowsocks.json -f /var/run/shadowsocks.pid

Security Tips

Although shadowsocks-libev can handle thousands of concurrent connections nicely, we still recommend to set up your server's firewall rules to limit connections from each user.

# Up to 32 connections are enough for normal usages
iptables -A INPUT -p tcp --syn --dport ${SHADOWSOCKS_PORT} -m connlimit --connlimit-above 32 -j REJECT --reject-with tcp-reset

License

This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program. If not, see http://www.gnu.org/licenses/.

11 KiB Raw Blame History