shadowsocks-libev

Intro

Shadowsocks-libev is a lightweight secured scoks5 proxy for embedded devices and low end boxes.

It is a port of shadowsocks created by @clowwindy maintained by @madeye.

Current version: 1.3.1

Changelog

shadowsocks 1.3.1 -- Tue, 04 Jun 2013 00:56:17 +0000

Support more cihpers: camellia, idea, rc2 and seed.

shadowsocks 1.3 -- Thu, 16 May 2013 10:51:15 +0800

Able to bind connections to specific interface
Support more ciphers: aes-128-cfb, aes-192-cfb, aes-256-cfb, bf-cfb, cast5-cfb, des-cfb

shadowsocks 1.2 -- Tue, 07 May 2013 14:10:33 +0800

Close timeouted TCP connections
Fix a high load issue

shadowsocks 1.1 -- Wed, 10 Apr 2013 12:11:36 +0800

Fix a IPV6 resolve issue

shadowsocks 1.0 -- Sat, 06 Apr 2013 16:59:15 +0800

Initial release

Features

Shadowsocks-libev is writen in pure C and only depends on libev.

When statically linked and packaged for OpenWRT, the total package size is 23KB. In normal usage, the memory consumption is about 600KB and the CPU utilization is no more than 5% on a low-end router (Buffalo WHR-G300N V2 with a 400MHz MIPS CPU, 32MB memory and 4MB flash).

Installation

Build the binary like this:

    sudo apt-get install build-essential autoconf libtool libssl-dev
    ./configure && make
    sudo make install

Usage

usage:

ss-[local|redir|server]
      -s <server_host>        -p <server_port>
      -l <local_port>         -k <password>
      [-m <encrypt_method>]   [-f <pid_file>]
      [-t <timeout>]          [-c <config_file>]
      [-i <interface>]        [-b <local_address>]

options:

encrypt_method:   table, rc4,
                  aes-128-cfb, aes-192-cfb, aes-256-cfb,
                  bf-cfb, camellia-128-cfb, camellia-192-cfb,
                  camellia-256-cfb, cast5-cfb, des-cfb,
                  idea-cfb, rc2-cfb and seed-cfb
      pid_file:   valid path to the pid file
       timeout:   socket timeout in senconds
   config_file:   json format config file
     interface:   specific network interface to bind
 local_address:   specific address clients listen on

notes:

    ss-redir provides a transparent proxy function and only works on the 
    Linux platform with iptables.

Advanced usage

The latest shadowsocks-libev has provided a transparent mode. You can configure your linux based box or router to proxy all tcp traffic transparently.

# Create new chain
root@Wrt:~# iptables -t nat -N SHADOWSOCKS

# Ignore your shadowsocks server's addresses
# It's very IMPORTANT, just be careful.
root@Wrt:~# iptables -t nat -A SHADOWSOCKS -d 123.123.123.123 -j RETURN

# Ignore LANs and any other addresses you'd like to bypass the proxy
# See Wikipedia and RFC5735 for full list of reserved networks.
# See ashi009/bestroutetb for a highly optimized CHN route list.
root@Wrt:~# iptables -t nat -A SHADOWSOCKS -d 0.0.0.0/8 -j RETURN
root@Wrt:~# iptables -t nat -A SHADOWSOCKS -d 10.0.0.0/8 -j RETURN
root@Wrt:~# iptables -t nat -A SHADOWSOCKS -d 127.0.0.0/8 -j RETURN
root@Wrt:~# iptables -t nat -A SHADOWSOCKS -d 169.254.0.0/16 -j RETURN
root@Wrt:~# iptables -t nat -A SHADOWSOCKS -d 172.16.0.0/12 -j RETURN
root@Wrt:~# iptables -t nat -A SHADOWSOCKS -d 192.168.0.0/16 -j RETURN
root@Wrt:~# iptables -t nat -A SHADOWSOCKS -d 224.0.0.0/4 -j RETURN
root@Wrt:~# iptables -t nat -A SHADOWSOCKS -d 240.0.0.0/4 -j RETURN

# Anything else should be redirected to shadowsocks's local port
root@Wrt:~# iptables -t nat -A SHADOWSOCKS -p tcp -j REDIRECT --to-ports 12345

# Apply the rules
root@Wrt:~# iptables -t nat -A OUTPUT -p tcp -j SHADOWSOCKS

# Start the shadowsocks-redir
root@Wrt:~# ss-redir -c /etc/config/shadowsocks.json -f /var/run/shadowsocks.pid

Security Tips

Although shadowsocks-libev can handle thousands of concurrent connections nicely, we still recommend to set up your server's firewall rules to limit connections from each user.

# Up to 32 connections are enough for normal usages
iptables -A INPUT -p tcp --syn --dport ${SHADOWSOCKS_PORT} -m connlimit --connlimit-above 32 -j REJECT --reject-with tcp-reset

License

This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program. If not, see http://www.gnu.org/licenses/.

5.1 KiB Raw Blame History