# shadowsocks-libev

## Intro

[Shadowsocks-libev](http://shadowsocks.org) is a lightweight secured SOCKS5
proxy for embedded devices and low-end boxes.

It is a port of [Shadowsocks](https://github.com/shadowsocks/shadowsocks)
created by [@clowwindy](https://github.com/clowwindy), which is maintained by
[@madeye](https://github.com/madeye) and [@linusyang](https://github.com/linusyang).

Current version: 2.4.5 | [Changelog](debian/changelog)

Travis CI: [![Travis CI](https://travis-ci.org/shadowsocks/shadowsocks-libev.svg?branch=master)](https://travis-ci.org/shadowsocks/shadowsocks-libev) | Jenkins Matrix: [![Jenkins](https://jenkins.shadowvpn.org/buildStatus/icon?job=Shadowsocks-libev)](https://jenkins.shadowvpn.org/job/Shadowsocks-libev/)

## Features

Shadowsocks-libev is written in pure C and only depends on
[libev](http://software.schmorp.de/pkg/libev.html) and
[OpenSSL](http://www.openssl.org/) or [PolarSSL](https://polarssl.org/).
The use of [mbedTLS](https://tls.mbed.org/) is added but still for testing, and
it is not officially supported yet.

In normal usage, the memory footprint is about 600KB and the CPU utilization is
no more than 5% on a low-end router (Buffalo WHR-G300N V2 with a 400MHz MIPS CPU,
32MB memory and 4MB flash).

For a full list of feature comparison between different versions of shadowsocks,
refer to the [Wiki page](https://github.com/shadowsocks/shadowsocks/wiki/Feature-Comparison-across-Different-Versions).


## Installation

### Distribution-specific guide

- [Debian & Ubuntu](#debian--ubuntu)
    + [Install from repository](#install-from-repository)
    + [Build deb package from source](#build-deb-package-from-source)
    + [Configure and start the service](#configure-and-start-the-service)
- [Fedora & RHEL](#fedora--rhel)
    + [Install from repository](#install-from-repository-1)
- [OpenSUSE](#opensuse)
    + [Install from repository](#install-from-repository-2)
    + [Build from source](#build-from-source)
- [Archlinux](#archlinux)
- [Directly build and install on UNIX-like system](#linux)
- [FreeBSD](#freebsd)
- [OpenWRT](#openwrt)
- [OS X](#os-x)
- [Windows](#windows)

* * *

### Pre-build configure guide

For a complete list of avaliable configure-time option,
try `configure --help`.

#### Using alternative crypto library

There are three crypto libraries available:

- OpenSSL (**default**)
- PolarSSL
- mbedTLS (__NOT__ officially supported)

##### PolarSSL

To build against PolarSSL, specify `--with-crypto-library=polarssl`
and `--with-polarssl=/path/to/polarssl` when running `./configure`.

* PolarSSL __1.2.5 or newer__ is required. Currently, PolarSSL does __NOT__ support
CAST5-CFB, DES-CFB, IDEA-CFB, RC2-CFB and SEED-CFB.
* RC4 is only support by PolarSSL __1.3.0 or above__.

##### mbedTLS
To build against mbedTLS, specify `--with-crypto-library=mbedtls`
and `--with-mbedtls=/path/to/mbedtls` when running `./configure`.

Please note that we do **NOT** officially support mbedTLS right now,
and you should use it at your own risk.

Windows users will need extra work when compiling mbedTLS library,
see [this issue](https://github.com/shadowsocks/shadowsocks-libev/issues/422) for detail info.

#### Using shared library from system

Please specify `--enable-system-shared-lib`. This will replace the bundled
`libev`, `libsodium` and `libudns` with the corresponding libraries installed
in the system during compilation and linking.

### Debian & Ubuntu

#### Install from repository

**Note: The repository doesn't always contain the latest version. Please build from source if you want the latest version (see below)**

Add GPG public key:

```bash
wget -O- http://shadowsocks.org/debian/1D27208A.gpg | sudo apt-key add -
```

Add either of the following lines to your /etc/apt/sources.list:

```
# Ubuntu 14.04 or above
deb http://shadowsocks.org/ubuntu trusty main

# Debian Wheezy, Ubuntu 12.04 or any distribution with libssl > 1.0.1
deb http://shadowsocks.org/debian wheezy main

```

Then:

``` bash
sudo apt-get update
sudo apt-get install shadowsocks-libev
```

#### Build deb package from source

Supported Platforms:

* Debian 7 (see below), 8, unstable
* Ubuntu 14.04 (see below), Ubuntu 14.10, 15.04, 15.10 or higher

**Note for Ubuntu 14.04 users**:
Packages built on Ubuntu 14.04 may be used in later Ubuntu versions. However,
packages built on Debian 7/8/9 or Ubuntu 14.10+ **cannot** be installed on
Ubuntu 14.04.

**Note for Debian 7.x users**:
To build packages on Debian 7 (Wheezy), you need to enable `debian-backports`
to install systemd-compatibility packages like `dh-systemd` or `init-system-helpers`.
Please follow the instructions on [Debian Backports](http://backports.debian.org).

This also means that you can only install those built packages on systems that have
`init-system-helpers` installed.

Otherwise, try to build and install directly from source. See the [Linux](#linux)
section below.

``` bash
cd shadowsocks-libev
sudo apt-get install build-essential autoconf libtool libssl-dev \
    gawk debhelper dh-systemd init-system-helpers pkg-config
dpkg-buildpackage -us -uc -i
cd ..
sudo dpkg -i shadowsocks-libev*.deb
```

#### Configure and start the service

```
# Edit the configuration file
sudo vim /etc/shadowsocks-libev/config.json

# Edit the default configuration for debian
sudo vim /etc/default/shadowsocks-libev

# Start the service
sudo /etc/init.d/shadowsocks-libev start    # for sysvinit, or
sudo systemctl start shadowsocks-libev      # for systemd
```

### Fedora & RHEL

Supported distributions include
- Fedora 20, 21, rawhide
- RHEL 6, 7 and derivatives (including CentOS, Scientific Linux)

#### Install from repository

Enable repo via `dnf`:

```
su -c 'dnf copr enable librehat/shadowsocks'
```

Or download yum repo on [Fedora Copr](https://copr.fedoraproject.org/coprs/librehat/shadowsocks/) and put it inside `/etc/yum.repos.d/`. The release `Epel` is for RHEL and its derivatives.

Then, install `shadowsocks-libev` via `dnf`:

```bash
su -c 'dnf update'
su -c 'dnf install shadowsocks-libev'
```

or `yum`:

```bash
su -c 'yum update'
su -c 'yum install shadowsocks-libev'
```
### OpenSUSE

#### Install from repository
Use the following command to install from repository.

```bash
sudo zypper install shadowsocks-libev
```

#### Build from source
You should install `zlib-devel` and `libopenssl-devel` first.

```bash
sudo zypper update
sudo zypper install zlib-devel libopenssl-devel
```

Then download the source package and compile.

```bash
git clone https://github.com/shadowsocks/shadowsocks-libev.git
cd shadowsocks-libev
./configure && make
sudo make install
```

### Archlinux

```bash
sudo pacman -S shadowsocks-libev
```

Please refer to downstream [PKGBUILD](https://projects.archlinux.org/svntogit/community.git/tree/trunk?h=packages/shadowsocks-libev)
script for extra modifications and distribution-specific bugs.

### Linux

For Unix-like systems, especially Debian-based systems,
e.g. Ubuntu, Debian or Linux Mint, you can build the binary like this:

```bash
sudo apt-get install build-essential autoconf libtool libssl-dev
./configure && make
sudo make install
```

### FreeBSD

```bash
su
cd /usr/ports/net/shadowsocks-libev
make install
```

Edit your config.json file. By default, it's located in /usr/local/etc/shadowsocks-libev.

To enable shadowsocks-libev, add the following rc variable to your /etc/rc.conf file:

```
shadowsocks_libev_enable="YES"
```

Start the Shadowsocks server:

```bash
service shadowsocks_libev start
```

### OpenWRT

**Note**: You may want to use [openwrt-shadowsocks](https://github.com/shadowsocks/openwrt-shadowsocks)
, which is developed specifically for OpenWRT.

```bash
# At OpenWRT build root
pushd package
git clone https://github.com/shadowsocks/shadowsocks-libev.git
popd

# Enable shadowsocks-libev in network category
make menuconfig

# Optional
make -j

# Build the package
make V=99 package/shadowsocks-libev/openwrt/compile
```

### OS X
For OS X, use [Homebrew](http://brew.sh) to install or build.

Install Homebrew:

```bash
ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
```
Install shadowsocks-libev:

```bash
brew install shadowsocks-libev
```

### Windows

For Windows, use either MinGW (msys) or Cygwin to build.
At the moment, only `ss-local` is supported to build against MinGW (msys).

If you are using MinGW (msys), please download OpenSSL or PolarSSL source tarball
to the home directory of msys, and build it like this (may take a few minutes):

#### OpenSSL

```bash
tar zxf openssl-1.0.1e.tar.gz
cd openssl-1.0.1e
./config --prefix="$HOME/prebuilt" --openssldir="$HOME/prebuilt/openssl"
make && make install
```

#### PolarSSL

```bash
tar zxf polarssl-1.3.2-gpl.tgz
cd polarssl-1.3.2
make lib WINDOWS=1
make install DESTDIR="$HOME/prebuilt"
```

Then, build the binary using the commands below, and all `.exe` files
will be built at `$HOME/ss/bin`:

#### OpenSSL

```bash
./configure --prefix="$HOME/ss" --with-openssl="$HOME/prebuilt"
make && make install
```

#### PolarSSL

```bash
./configure --prefix="$HOME/ss" --with-crypto-library=polarssl --with-polarssl=$HOME/prebuilt
make && make install
```

## Usage

For a detailed and complete list of all supported arguments, you may refer to the
man pages of the applications, respectively.

```
    ss-[local|redir|server|tunnel]

       -s <server_host>           host name or ip address of your remote server

       -p <server_port>           port number of your remote server

       -l <local_port>            port number of your local server

       -k <password>              password of your remote server

       [-m <encrypt_method>]      encrypt method: table, rc4, rc4-md5,
                                  aes-128-cfb, aes-192-cfb, aes-256-cfb,
                                  bf-cfb, camellia-128-cfb, camellia-192-cfb,
                                  camellia-256-cfb, cast5-cfb, des-cfb, idea-cfb,
                                  rc2-cfb, seed-cfb, salsa20 ,chacha20 and
                                  chacha20-ietf

       [-f <pid_file>]            the file path to store pid

       [-t <timeout>]             socket timeout in seconds

       [-c <config_file>]         the path to config file

       [-i <interface>]           network interface to bind,
                                  not available in redir mode

       [-b <local_address>]       local address to bind,
                                  not available in server mode

       [-u]                       enable udprelay mode,
                                  TPROXY is required in redir mode

       [-U]                       enable UDP relay and disable TCP relay,
                                  not available in local mode

       [-A]                       enable onetime authentication

       [-L <addr>:<port>]         specify destination server address and port
                                  for local port forwarding,
                                  only available in tunnel mode

       [-d <addr>]                setup name servers for internal DNS resolver,
                                  only available in server mode

       [--fast-open]              enable TCP fast open,
                                  only available in local and server mode,
                                  with Linux kernel > 3.7.0

       [--acl <acl_file>]         config file of ACL (Access Control List)
                                  only available in local and server mode

       [--manager-address <addr>] UNIX domain socket address
                                  only available in server and manager mode

       [--executable <path>]      path to the executable of ss-server
                                  only available in manager mode

       [-v]                       verbose mode

notes:

    ss-redir provides a transparent proxy function and only works on the
    Linux platform with iptables.

```

## Advanced usage

The latest shadowsocks-libev has provided a *redir* mode. You can configure your Linux-based box or router to proxy all TCP traffic transparently.

    # Create new chain
    root@Wrt:~# iptables -t nat -N SHADOWSOCKS
    root@Wrt:~# iptables -t mangle -N SHADOWSOCKS

    # Ignore your shadowsocks server's addresses
    # It's very IMPORTANT, just be careful.
    root@Wrt:~# iptables -t nat -A SHADOWSOCKS -d 123.123.123.123 -j RETURN

    # Ignore LANs and any other addresses you'd like to bypass the proxy
    # See Wikipedia and RFC5735 for full list of reserved networks.
    # See ashi009/bestroutetb for a highly optimized CHN route list.
    root@Wrt:~# iptables -t nat -A SHADOWSOCKS -d 0.0.0.0/8 -j RETURN
    root@Wrt:~# iptables -t nat -A SHADOWSOCKS -d 10.0.0.0/8 -j RETURN
    root@Wrt:~# iptables -t nat -A SHADOWSOCKS -d 127.0.0.0/8 -j RETURN
    root@Wrt:~# iptables -t nat -A SHADOWSOCKS -d 169.254.0.0/16 -j RETURN
    root@Wrt:~# iptables -t nat -A SHADOWSOCKS -d 172.16.0.0/12 -j RETURN
    root@Wrt:~# iptables -t nat -A SHADOWSOCKS -d 192.168.0.0/16 -j RETURN
    root@Wrt:~# iptables -t nat -A SHADOWSOCKS -d 224.0.0.0/4 -j RETURN
    root@Wrt:~# iptables -t nat -A SHADOWSOCKS -d 240.0.0.0/4 -j RETURN

    # Anything else should be redirected to shadowsocks's local port
    root@Wrt:~# iptables -t nat -A SHADOWSOCKS -p tcp -j REDIRECT --to-ports 12345

    # Add any UDP rules
    root@Wrt:~# ip rule add fwmark 0x01/0x01 table 100
    root@Wrt:~# ip route add local 0.0.0.0/0 dev lo table 100
    root@Wrt:~# iptables -t mangle -A SHADOWSOCKS -p udp --dport 53 -j TPROXY --on-port 12345 --tproxy-mark 0x01/0x01

    # Apply the rules
    root@Wrt:~# iptables -t nat -A PREROUTING -p tcp -j SHADOWSOCKS
    root@Wrt:~# iptables -t mangle -A PREROUTING -j SHADOWSOCKS

    # Start the shadowsocks-redir
    root@Wrt:~# ss-redir -u -c /etc/config/shadowsocks.json -f /var/run/shadowsocks.pid

## Security Tips

Although shadowsocks-libev can handle thousands of concurrent connections nicely, we still recommend
setting up your server's firewall rules to limit connections from each user:

    # Up to 32 connections are enough for normal usage
    iptables -A INPUT -p tcp --syn --dport ${SHADOWSOCKS_PORT} -m connlimit --connlimit-above 32 -j REJECT --reject-with tcp-reset

## License

Copyright (C) 2015 Max Lv <max.c.lv@gmail.com>

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.