|
|
shadowsocks-libev(8)====================
NAME----shadowsocks-libev - a lightweight and secure socks5 proxy
SYNOPSIS--------*ss-local*|*ss-redir*|*ss-server*|*ss-tunnel*|*ss-manager* [-s <server_host>] [-p <server_port>] [-l <local_port>] [-k <password>] [-m <encrypt_method>] [-f <pid_file>] [-t <timeout>] [-c <config_file>]
DESCRIPTION-----------*Shadowsocks-libev* is a lightweight and secure socks5 proxy.It is a port of the original shadowsocks created by clowwindy.*Shadowsocks-libev* is written in pure C and takes advantage of *libev*to achieve both high performance and low resource consumption.
*Shadowsocks-libev* consists of five components. One is `ss-server`(1)that runs on a remote server to provide secured tunnel service.`ss-local`(1) and `ss-redir`(1) are clients on your local machines to proxytraffic(TCP/UDP or both).`ss-tunnel`(1) is a tool for local port forwarding.
While `ss-local`(1) works as a standard socks5 proxy, `ss-redir`(1) worksas a transparent proxy and requires netfilter's NAT module. For moreinformation, check out the 'EXAMPLE' section.
`ss-manager`(1) is a controller for multi-user management and trafficstatistics, using UNIX domain socket to talk with `ss-server`(1).Also, it provides a UNIX domain socket or IP based API for other software.About the details of this API, please refer to the 'PROTOCOL' section.
OPTIONS-------
-s <server_host>::Set the server's hostname or IP.
-l <local_port>::Set the local port number.+Not available in server nor manager mode.
-k <password>::--password <password>::Set the password. The server and the client should use the same password.
--key <key_in_base64>::Set the key directly. The key should be encoded with URL-safe Base64.+Not available in manager mode.
-m <encrypt_method>::Set the cipher.+*Shadowsocks-libev* accepts 18 different ciphers:+aes-128-gcm, aes-192-gcm, aes-256-gcm,rc4-md5, aes-128-cfb, aes-192-cfb, aes-256-cfb,aes-128-ctr, aes-192-ctr, aes-256-ctr, bf-cfb,camellia-128-cfb, camellia-192-cfb, camellia-256-cfb,chacha20-ietf-poly1305, salsa20, chacha20 and chacha20-ietf.+The default cipher is 'chacha20-ietf-poly1305'.+If built with PolarSSL or custom OpenSSL libraries, some ofthese ciphers may not work.
-a <user_name>::Run as a specific user.
-f <pid_file>::Start shadowsocks as a daemon with specific pid file.
-t <timeout>::Set the socket timeout in seconds. The default value is 60.
-c <config_file>::Use a configuration file.
-n <number>::Specify max number of open files.+Not available in manager mode.+Only available on Linux.
-i <interface>::Send traffic through specific network interface.+For example, there are three interfaces in your device, which islo (127.0.0.1), eth0 (192.168.0.1) and eth1 (192.168.0.2).Meanwhile, you configure *shadowsocks-libev* to listen on 0.0.0.0:8388and bind to eth1. That results the traffic go out through eth1,but not lo nor eth0. This option is useful to control traffic inmulti-interface environment.+Not available in redir mode.
-b <local_address>::Specify the local address to bind.+For servers: Specify the local address to use while this server is makingoutbound connections to remote servers on behalf of the clients.+For clients: Specify the local address to use while this client is makingoutbound connections to the server.+Not available in manager mode.
-u::Enable UDP relay.+TPROXY is required in redir mode. You may need root permission.
-U::Enable UDP relay and disable TCP relay.+Not available in local mode.
-L <addr:port>::Specify destination server address and port for local port forwarding.+Only available in tunnel mode.
-d <addr>::Setup name servers for internal DNS resolver (libc-ares).The default server is fetched from /etc/resolv.conf.+Only available in server and manager mode.
--fast-open::Enable TCP fast open.+Not available in redir nor tunnel mode, with Linux kernel > 3.7.0.
--reuse-port::Enable port reuse.+Only available with Linux kernel > 3.9.0.
--no-delay::Enable TCP_NODELAY.
--acl <acl_config>::Enable ACL (Access Control List) and specify config file.+Not available in redir nor tunnel mode.
--manager-address <path_to_unix_domain>::Specify UNIX domain socket address.+Only available in server and manager mode.
--executable <path_to_server_executable>::Specify the executable path of `ss-server`.+Only available in manager mode.
-v::Enable verbose mode.
-h|--help::Print help message.
CONFIG FILE-----------The config file is written in JSON and easy to edit.
The config file equivalent of command line options is listed as example below.[frame="topbot",options="header"]|==========================================================================| Command line | JSON| -s some.server.net | "server": "some.server.net"| -s some.server.net -p 1234 (client) | "server": "some.server.net:1234"| -p 1234 | "server_port": "1234"| -b 0.0.0.0 | "local_address": "0.0.0.0"| -b 10.0.0.2 | "local_ipv4_address": "10.0.0.2"| -b 2620:129:35::33 | "local_ipv6_address": "2620:129:35::33"| -l 4321 | "local_port": "4321"| -k "PasSworD" | "password": "PasSworD"| -m "aes-256-cfb" | "method": "aes-256-cfb"| -t 60 | "timeout": 60| -a nobody | "user": "nobody"| --acl "/path/to/acl" | "acl": "/path/to/acl"| --fast-open | "fast_open": true| --reuse-port | "reuse_port": true| --no-delay | "no_delay": true| --plugin "obfs-server" | "plugin": "obfs-server"| --plugin-opts "obfs=http" | "plugin_opts": "obfs=http"| -6 | "ipv6_first": true| -n "/etc/nofile" | "nofile": "/etc/nofile"| -d "8.8.8.8" | "nameserver": "8.8.8.8"| -L "somedns.net:53" | "tunnel_address": "somedns.net:53"| -u | "mode": "tcp_and_udp"| -U | "mode": "udp_only"| no "-u" nor "-U" options (default) | "mode": "tcp_only"| (only in ss-manager's config) | "port_password": {"1234":"PasSworD"}|============================================================================
EXAMPLE-------`ss-redir` requires netfilter's NAT function. Here is an example:
....# Create new chainiptables -t nat -N SHADOWSOCKSiptables -t mangle -N SHADOWSOCKS
# Ignore your shadowsocks server's addresses# It's very IMPORTANT, just be careful.iptables -t nat -A SHADOWSOCKS -d 123.123.123.123 -j RETURN
# Ignore LANs and any other addresses you'd like to bypass the proxy# See Wikipedia and RFC5735 for full list of reserved networks.# See ashi009/bestroutetb for a highly optimized CHN route list.iptables -t nat -A SHADOWSOCKS -d 0.0.0.0/8 -j RETURNiptables -t nat -A SHADOWSOCKS -d 10.0.0.0/8 -j RETURNiptables -t nat -A SHADOWSOCKS -d 127.0.0.0/8 -j RETURNiptables -t nat -A SHADOWSOCKS -d 169.254.0.0/16 -j RETURNiptables -t nat -A SHADOWSOCKS -d 172.16.0.0/12 -j RETURNiptables -t nat -A SHADOWSOCKS -d 192.168.0.0/16 -j RETURNiptables -t nat -A SHADOWSOCKS -d 224.0.0.0/4 -j RETURNiptables -t nat -A SHADOWSOCKS -d 240.0.0.0/4 -j RETURN
# Anything else should be redirected to shadowsocks's local portiptables -t nat -A SHADOWSOCKS -p tcp -j REDIRECT --to-ports 12345
# Add any UDP rulesip rule add fwmark 0x01/0x01 table 100ip route add local 0.0.0.0/0 dev lo table 100iptables -t mangle -A SHADOWSOCKS -p udp --dport 53 -j TPROXY --on-port 12345 --tproxy-mark 0x01/0x01
# Apply the rulesiptables -t nat -A PREROUTING -p tcp -j SHADOWSOCKSiptables -t mangle -A PREROUTING -j SHADOWSOCKS
# Start the shadowsocks-redirss-redir -u -c /etc/config/shadowsocks.json -f /var/run/shadowsocks.pid....
PROTOCOL--------`ss-manager`(1) provides several APIs through UDP protocol::
Send UDP commands in the following format to the manager-address provided to ss-manager(1): :::: command: [JSON data]
To add a port: :::: add: {"server_port": 8001, "password":"7cd308cc059"}
To remove a port: :::: remove: {"server_port": 8001}
To receive a pong: :::: ping
Then `ss-manager`(1) will send back the traffic statistics: :::: stat: {"8001":11370}
SEE ALSO--------`ss-local`(1),`ss-server`(1),`ss-tunnel`(1),`ss-redir`(1),`ss-manager`(1),`iptables`(8),/etc/shadowsocks-libev/config.json
|
