# Vagrant Assuming you have Vagrant 2.0+ installed with virtualbox or libvirt/qemu (vmware may work, but is untested) you should be able to launch a 3 node Kubernetes cluster by simply running `vagrant up`. This will spin up 3 VMs and install kubernetes on them. Once they are completed you can connect to any of them by running `vagrant ssh k8s-[1..3]`. To give an estimate of the expected duration of a provisioning run: On a dual core i5-6300u laptop with an SSD, provisioning takes around 13 to 15 minutes, once the container images and other files are cached. Note that libvirt/qemu is recommended over virtualbox as it is quite a bit faster, especially during boot-up time. For proper performance a minimum of 12GB RAM is recommended. It is possible to run a 3 node cluster on a laptop with 8GB of RAM using the default Vagrantfile, provided you have 8GB zram swap configured and not much more than a browser and a mail client running. If you decide to run on such a machine, then also make sure that any tmpfs devices, that are mounted, are mostly empty and disable any swapfiles mounted on HDD/SSD or you will be in for some serious swap-madness. Things can get a bit sluggish during provisioning, but when that's done, the system will actually be able to perform quite well. ## Customize Vagrant You can override the default settings in the `Vagrantfile` either by directly modifying the `Vagrantfile` or through an override file. In the same directory as the `Vagrantfile`, create a folder called `vagrant` and create `config.rb` file in it. An example of how to configure this file is given below. ## Use alternative OS for Vagrant By default, Vagrant uses Ubuntu 18.04 box to provision a local cluster. You may use an alternative supported operating system for your local cluster. Customize `$os` variable in `Vagrantfile` or as override, e.g.,: ```ShellSession echo '$os = "flatcar-stable"' >> vagrant/config.rb ``` The supported operating systems for vagrant are defined in the `SUPPORTED_OS` constant in the `Vagrantfile`. ## File and image caching Kubespray can take quite a while to start on a laptop. To improve provisioning speed, the variable 'download_run_once' is set. This will make kubespray download all files and containers just once and then redistributes them to the other nodes and as a bonus, also cache all downloads locally and re-use them on the next provisioning run. For more information on download settings see [download documentation](/docs/downloads.md). ## Example use of Vagrant The following is an example of setting up and running kubespray using `vagrant`. For repeated runs, you could save the script to a file in the root of the kubespray and run it by executing `source `. ```ShellSession # use virtualenv to install all python requirements VENVDIR=venv virtualenv --python=/usr/bin/python3.7 $VENVDIR source $VENVDIR/bin/activate pip install -r requirements.txt # prepare an inventory to test with INV=inventory/my_lab rm -rf ${INV}.bak &> /dev/null mv ${INV} ${INV}.bak &> /dev/null cp -a inventory/sample ${INV} rm -f ${INV}/hosts.ini # customize the vagrant environment mkdir vagrant cat << EOF > vagrant/config.rb \$instance_name_prefix = "kub" \$vm_cpus = 1 \$num_instances = 3 \$os = "centos-bento" \$subnet = "10.0.20" \$network_plugin = "flannel" \$inventory = "$INV" \$shared_folders = { 'temp/docker_rpms' => "/var/cache/yum/x86_64/7/docker-ce/packages" } EOF # make the rpm cache mkdir -p temp/docker_rpms vagrant up # make a copy of the downloaded docker rpm, to speed up the next provisioning run scp kub-1:/var/cache/yum/x86_64/7/docker-ce/packages/* temp/docker_rpms/ # copy kubectl access configuration in place mkdir $HOME/.kube/ &> /dev/null ln -s $PWD/$INV/artifacts/admin.conf $HOME/.kube/config # make the kubectl binary available sudo ln -s $PWD/$INV/artifacts/kubectl /usr/local/bin/kubectl #or export PATH=$PATH:$PWD/$INV/artifacts ``` If a vagrant run failed and you've made some changes to fix the issue causing the fail, here is how you would re-run ansible: ```ShellSession ansible-playbook -vvv -i .vagrant/provisioners/ansible/inventory/vagrant_ansible_inventory cluster.yml ``` If all went well, you check if it's all working as expected: ```ShellSession kubectl get nodes ``` The output should look like this: ```ShellSession $ kubectl get nodes NAME STATUS ROLES AGE VERSION kub-1 Ready control-plane,master 4m37s v1.22.5 kub-2 Ready control-plane,master 4m7s v1.22.5 kub-3 Ready 3m7s v1.22.5 ``` Another nice test is the following: ```ShellSession kubectl get pods --all-namespaces -o wide ``` Which should yield something like the following: ```ShellSession $ kubectl get pods --all-namespaces -o wide NAMESPACE NAME READY STATUS RESTARTS AGE IP NODE NOMINATED NODE READINESS GATES kube-system coredns-8474476ff8-m2469 1/1 Running 0 2m45s 10.233.65.2 kub-2 kube-system coredns-8474476ff8-v5wzj 1/1 Running 0 2m41s 10.233.64.3 kub-1 kube-system dns-autoscaler-5ffdc7f89d-76tnv 1/1 Running 0 2m43s 10.233.64.2 kub-1 kube-system kube-apiserver-kub-1 1/1 Running 1 4m54s 10.0.20.101 kub-1 kube-system kube-apiserver-kub-2 1/1 Running 1 4m33s 10.0.20.102 kub-2 kube-system kube-controller-manager-kub-1 1/1 Running 1 5m1s 10.0.20.101 kub-1 kube-system kube-controller-manager-kub-2 1/1 Running 1 4m33s 10.0.20.102 kub-2 kube-system kube-flannel-9xgf5 1/1 Running 0 3m10s 10.0.20.102 kub-2 kube-system kube-flannel-l8jbl 1/1 Running 0 3m10s 10.0.20.101 kub-1 kube-system kube-flannel-zss4t 1/1 Running 0 3m10s 10.0.20.103 kub-3 kube-system kube-multus-ds-amd64-bhpc9 1/1 Running 0 3m2s 10.0.20.103 kub-3 kube-system kube-multus-ds-amd64-n6vl8 1/1 Running 0 3m2s 10.0.20.102 kub-2 kube-system kube-multus-ds-amd64-qttgs 1/1 Running 0 3m2s 10.0.20.101 kub-1 kube-system kube-proxy-2x4jl 1/1 Running 0 3m33s 10.0.20.101 kub-1 kube-system kube-proxy-d48r7 1/1 Running 0 3m33s 10.0.20.103 kub-3 kube-system kube-proxy-f45lp 1/1 Running 0 3m33s 10.0.20.102 kub-2 kube-system kube-scheduler-kub-1 1/1 Running 1 4m54s 10.0.20.101 kub-1 kube-system kube-scheduler-kub-2 1/1 Running 1 4m33s 10.0.20.102 kub-2 kube-system nginx-proxy-kub-3 1/1 Running 0 3m33s 10.0.20.103 kub-3 kube-system nodelocaldns-cg9tz 1/1 Running 0 2m41s 10.0.20.102 kub-2 kube-system nodelocaldns-htswt 1/1 Running 0 2m41s 10.0.20.103 kub-3 kube-system nodelocaldns-nsp7s 1/1 Running 0 2m41s 10.0.20.101 kub-1 local-path-storage local-path-provisioner-66df45bfdd-km4zg 1/1 Running 0 2m54s 10.233.66.2 kub-3 ```