---
# cilium_version: "v1.15.4"

# Log-level
# cilium_debug: false

# cilium_mtu: ""
# cilium_enable_ipv4: true
# cilium_enable_ipv6: false

# Enable l2 announcement from cilium to replace Metallb Ref: https://docs.cilium.io/en/v1.14/network/l2-announcements/
cilium_l2announcements: false

# Cilium agent health port
# cilium_agent_health_port: "9879"

# Identity allocation mode selects how identities are shared between cilium
# nodes by setting how they are stored. The options are "crd" or "kvstore".
# - "crd" stores identities in kubernetes as CRDs (custom resource definition).
#   These can be queried with:
#     `kubectl get ciliumid`
# - "kvstore" stores identities in an etcd kvstore.
# - In order to support External Workloads, "crd" is required
#   - Ref: https://docs.cilium.io/en/stable/gettingstarted/external-workloads/#setting-up-support-for-external-workloads-beta
# - KVStore operations are only required when cilium-operator is running with any of the below options:
#   - --synchronize-k8s-services
#   - --synchronize-k8s-nodes
#   - --identity-allocation-mode=kvstore
#   - Ref: https://docs.cilium.io/en/stable/internals/cilium_operator/#kvstore-operations
# cilium_identity_allocation_mode: kvstore

# Etcd SSL dirs
# cilium_cert_dir: /etc/cilium/certs
# kube_etcd_cacert_file: ca.pem
# kube_etcd_cert_file: cert.pem
# kube_etcd_key_file: cert-key.pem

# Limits for apps
# cilium_memory_limit: 500M
# cilium_cpu_limit: 500m
# cilium_memory_requests: 64M
# cilium_cpu_requests: 100m

# Overlay Network Mode
# cilium_tunnel_mode: vxlan

# LoadBalancer Mode (snat/dsr/hybrid) Ref: https://docs.cilium.io/en/stable/network/kubernetes/kubeproxy-free/#dsr-mode
# cilium_loadbalancer_mode: snat

# Optional features
# cilium_enable_prometheus: false
# Enable if you want to make use of hostPort mappings
# cilium_enable_portmap: false
# Monitor aggregation level (none/low/medium/maximum)
# cilium_monitor_aggregation: medium
# The monitor aggregation flags determine which TCP flags which, upon the
# first observation, cause monitor notifications to be generated.
#
# Only effective when monitor aggregation is set to "medium" or higher.
# cilium_monitor_aggregation_flags: "all"
# Kube Proxy Replacement mode (strict/partial)
# cilium_kube_proxy_replacement: partial

# If upgrading from Cilium < 1.5, you may want to override some of these options
# to prevent service disruptions. See also:
# http://docs.cilium.io/en/stable/install/upgrade/#changes-that-may-require-action
# cilium_preallocate_bpf_maps: false

# `cilium_tofqdns_enable_poller` is deprecated in 1.8, removed in 1.9
# cilium_tofqdns_enable_poller: false

# `cilium_enable_legacy_services` is deprecated in 1.6, removed in 1.9
# cilium_enable_legacy_services: false

# Unique ID of the cluster. Must be unique across all connected clusters and
# in the range of 1 and 255. Only relevant when building a mesh of clusters.
# This value is not defined by default
# cilium_cluster_id:

# Deploy cilium even if kube_network_plugin is not cilium.
# This enables to deploy cilium alongside another CNI to replace kube-proxy.
# cilium_deploy_additionally: false

# Auto direct nodes routes can be used to advertise pods routes in your cluster
# without any tunneling (with `cilium_tunnel_mode` sets to `disabled`).
# This works only if you have a L2 connectivity between all your nodes.
# You wil also have to specify the variable `cilium_native_routing_cidr` to
# make this work. Please refer to the cilium documentation for more
# information about this kind of setups.
# cilium_auto_direct_node_routes: false

# Allows to explicitly specify the IPv4 CIDR for native routing.
# When specified, Cilium assumes networking for this CIDR is preconfigured and
# hands traffic destined for that range to the Linux network stack without
# applying any SNAT.
# Generally speaking, specifying a native routing CIDR implies that Cilium can
# depend on the underlying networking stack to route packets to their
# destination. To offer a concrete example, if Cilium is configured to use
# direct routing and the Kubernetes CIDR is included in the native routing CIDR,
# the user must configure the routes to reach pods, either manually or by
# setting the auto-direct-node-routes flag.
# cilium_native_routing_cidr: ""

# Allows to explicitly specify the IPv6 CIDR for native routing.
# cilium_native_routing_cidr_ipv6: ""

# Enable transparent network encryption.
# cilium_encryption_enabled: false

# Encryption method. Can be either ipsec or wireguard.
# Only effective when `cilium_encryption_enabled` is set to true.
# cilium_encryption_type: "ipsec"

# Enable encryption for pure node to node traffic.
# This option is only effective when `cilium_encryption_type` is set to `ipsec`.
# cilium_ipsec_node_encryption: false

# If your kernel or distribution does not support WireGuard, Cilium agent can be configured to fall back on the user-space implementation.
# When this flag is enabled and Cilium detects that the kernel has no native support for WireGuard,
# it will fallback on the wireguard-go user-space implementation of WireGuard.
# This option is only effective when `cilium_encryption_type` is set to `wireguard`.
# cilium_wireguard_userspace_fallback: false

# IP Masquerade Agent
# https://docs.cilium.io/en/stable/concepts/networking/masquerading/
# By default, all packets from a pod destined to an IP address outside of the cilium_native_routing_cidr range are masqueraded
# cilium_ip_masq_agent_enable: false

### A packet sent from a pod to a destination which belongs to any CIDR from the nonMasqueradeCIDRs is not going to be masqueraded
# cilium_non_masquerade_cidrs:
#   - 10.0.0.0/8
#   - 172.16.0.0/12
#   - 192.168.0.0/16
#   - 100.64.0.0/10
#   - 192.0.0.0/24
#   - 192.0.2.0/24
#   - 192.88.99.0/24
#   - 198.18.0.0/15
#   - 198.51.100.0/24
#   - 203.0.113.0/24
#   - 240.0.0.0/4
### Indicates whether to masquerade traffic to the link local prefix.
### If the masqLinkLocal is not set or set to false, then 169.254.0.0/16 is appended to the non-masquerade CIDRs list.
# cilium_masq_link_local: false
### A time interval at which the agent attempts to reload config from disk
# cilium_ip_masq_resync_interval: 60s

# Hubble
### Enable Hubble without install
# cilium_enable_hubble: false
### Enable Hubble Metrics
# cilium_enable_hubble_metrics: false
### if cilium_enable_hubble_metrics: true
# cilium_hubble_metrics: {}
# - dns
# - drop
# - tcp
# - flow
# - icmp
# - http
### Enable Hubble install
# cilium_hubble_install: false
### Enable auto generate certs if cilium_hubble_install: true
# cilium_hubble_tls_generate: false

# IP address management mode for v1.9+.
# https://docs.cilium.io/en/v1.9/concepts/networking/ipam/
# cilium_ipam_mode: kubernetes

# Extra arguments for the Cilium agent
# cilium_agent_custom_args: []

# For adding and mounting extra volumes to the cilium agent
# cilium_agent_extra_volumes: []
# cilium_agent_extra_volume_mounts: []

# cilium_agent_extra_env_vars: []

# cilium_operator_replicas: 2

# The address at which the cillium operator bind health check api
# cilium_operator_api_serve_addr: "127.0.0.1:9234"

## A dictionary of extra config variables to add to cilium-config, formatted like:
##  cilium_config_extra_vars:
##    var1: "value1"
##    var2: "value2"
# cilium_config_extra_vars: {}

# For adding and mounting extra volumes to the cilium operator
# cilium_operator_extra_volumes: []
# cilium_operator_extra_volume_mounts: []

# Extra arguments for the Cilium Operator
# cilium_operator_custom_args: []

# Name of the cluster. Only relevant when building a mesh of clusters.
# cilium_cluster_name: default

# Make Cilium take ownership over the `/etc/cni/net.d` directory on the node, renaming all non-Cilium CNI configurations to `*.cilium_bak`.
# This ensures no Pods can be scheduled using other CNI plugins during Cilium agent downtime.
# Available for Cilium v1.10 and up.
# cilium_cni_exclusive: true

# Configure the log file for CNI logging with retention policy of 7 days.
# Disable CNI file logging by setting this field to empty explicitly.
# Available for Cilium v1.12 and up.
# cilium_cni_log_file: "/var/run/cilium/cilium-cni.log"

# -- Configure cgroup related configuration
# -- Enable auto mount of cgroup2 filesystem.
# When `cilium_cgroup_auto_mount` is enabled, cgroup2 filesystem is mounted at
# `cilium_cgroup_host_root` path on the underlying host and inside the cilium agent pod.
# If users disable `cilium_cgroup_auto_mount`, it's expected that users have mounted
# cgroup2 filesystem at the specified `cilium_cgroup_auto_mount` volume, and then the
# volume will be mounted inside the cilium agent pod at the same path.
# Available for Cilium v1.11 and up
# cilium_cgroup_auto_mount: true
# -- Configure cgroup root where cgroup2 filesystem is mounted on the host
# cilium_cgroup_host_root: "/run/cilium/cgroupv2"

# Specifies the ratio (0.0-1.0) of total system memory to use for dynamic
# sizing of the TCP CT, non-TCP CT, NAT and policy BPF maps.
# cilium_bpf_map_dynamic_size_ratio: "0.0"

# -- Enables masquerading of IPv4 traffic leaving the node from endpoints.
# Available for Cilium v1.10 and up
# cilium_enable_ipv4_masquerade: true
# -- Enables masquerading of IPv6 traffic leaving the node from endpoints.
# Available for Cilium v1.10 and up
# cilium_enable_ipv6_masquerade: true

# -- Enable native IP masquerade support in eBPF
# cilium_enable_bpf_masquerade: false

# -- Configure whether direct routing mode should route traffic via
# host stack (true) or directly and more efficiently out of BPF (false) if
# the kernel supports it. The latter has the implication that it will also
# bypass netfilter in the host namespace.
# cilium_enable_host_legacy_routing: true

# -- Enable use of the remote node identity.
# ref: https://docs.cilium.io/en/v1.7/install/upgrade/#configmap-remote-node-identity
# cilium_enable_remote_node_identity: true

# -- Enable the use of well-known identities.
# cilium_enable_well_known_identities: false

# cilium_enable_bpf_clock_probe: true

# -- Whether to enable CNP status updates.
# cilium_disable_cnp_status_updates: true

# A list of extra rules variables to add to clusterrole for cilium operator, formatted like:
#   cilium_clusterrole_rules_operator_extra_vars:
#     - apiGroups:
#       - '""'
#       resources:
#       - pods
#       verbs:
#       - delete
#     - apiGroups:
#       - '""'
#       resources:
#       - nodes
#       verbs:
#       - list
#       - watch
#       resourceNames:
#       - toto
# cilium_clusterrole_rules_operator_extra_vars: []