--- # geneve or vlan kube_ovn_network_type: geneve # geneve, vxlan or stt. ATTENTION: some networkpolicy cannot take effect when using vxlan and stt need custom compile ovs kernel module kube_ovn_tunnel_type: geneve ## The nic to support container network can be a nic name or a group of regex separated by comma e.g: 'enp6s0f0,eth.*', if empty will use the nic that the default route use. # kube_ovn_iface: eth1 ## The MTU used by pod iface in overlay networks (default iface MTU - 100) # kube_ovn_mtu: 1333 ## Enable hw-offload, disable traffic mirror and set the iface to the physical port. Make sure that there is an IP address bind to the physical port. kube_ovn_hw_offload: false # traffic mirror kube_ovn_traffic_mirror: false # kube_ovn_pool_cidr_ipv6: fd85:ee78:d8a6:8607::1:0000/112 # kube_ovn_default_interface_name: eth0 kube_ovn_external_address: 8.8.8.8 kube_ovn_external_address_ipv6: 2400:3200::1 kube_ovn_external_dns: alauda.cn # kube_ovn_default_gateway: 10.233.64.1,fd85:ee78:d8a6:8607::1:0 kube_ovn_default_gateway_check: true kube_ovn_default_logical_gateway: false # kube_ovn_default_exclude_ips: 10.16.0.1 kube_ovn_node_switch_cidr: 100.64.0.0/16 kube_ovn_node_switch_cidr_ipv6: fd00:100:64::/64 ## vlan config, set default interface name and vlan id # kube_ovn_default_interface_name: eth0 kube_ovn_default_vlan_id: 100 kube_ovn_vlan_name: product ## pod nic type, support: veth-pair or internal-port kube_ovn_pod_nic_type: veth_pair ## Enable load balancer kube_ovn_enable_lb: true ## Enable network policy support kube_ovn_enable_np: true ## Enable external vpc support kube_ovn_enable_external_vpc: true ## Enable checksum kube_ovn_encap_checksum: true ## enable ssl kube_ovn_enable_ssl: false ## dpdk kube_ovn_dpdk_enabled: false ## enable interconnection to an existing IC database server. kube_ovn_ic_enable: false kube_ovn_ic_autoroute: true kube_ovn_ic_dbhost: "127.0.0.1" kube_ovn_ic_zone: "kubernetes"