* contrib/terraform/exoscale: Rework SSH public keys
Exoscale has a few limitations with `exoscale_ssh_keypair` resources.
Creating several clusters with these scripts may lead to an error like:
```
Error: API error ParamError 431 (InvalidParameterValueException 4350): The key pair "lj-sc-ssh-key" already has this fingerprint
```
This patch reworks handling of SSH public keys. Specifically, we rely on
the more cloud-agnostic way of configuring SSH public keys via
`cloud-init`.
* contrib/terraform/exoscale: terraform fmt
* contrib/terraform/exoscale: Add terraform validate
* contrib/terraform/exoscale: Inline public SSH keys
The Terraform scripts need to install some SSH key, so that Kubespray
(i.e., the "Ansible part") can take over. Initially, we pointed the
Terraform scripts to `~/.ssh/id_rsa.pub`. This proved to be suboptimal:
Operators sharing responbility for a cluster risk unnecessarily replacing resources.
Therefore, it has been determined that it's best to inline the public
SSH keys. The chosen variable `ssh_public_keys` provides some uniformity
with `contrib/azurerm`.
* Fix Terraform Exoscale test
* Fix Terraform 0.14 test
This variable was added as KUBE_MASTERS_MASTERS. That's probably a typo.
Remove the redundant `_MASTERS` suffix. Also, document the variable in the
help message.
This fixes the following failures:
./contrib/offline/README.md:14:1 MD014/commands-show-output Dollar signs used before commands without showing output [Context: "$ ./manage-offline-container-i..."]
./contrib/offline/README.md:20:1 MD014/commands-show-output Dollar signs used before commands without showing output [Context: "$ ./manage-offline-container-i..."]
* [terraform/aws] Fix Terraform >=0.13 warnings
Terraform >=0.13 gives the following warning:
```
Warning: Interpolation-only expressions are deprecated
```
The fix was tested as follows:
```
rm -rf .terraform && terraform0.12.26 init && terraform0.12.26 validate
rm -rf .terraform && terraform0.13.5 init && terraform0.13.5 validate
rm -rf .terraform && terraform0.14.3 init && terraform0.14.3 validate
```
which gave no errors nor warnings.
* [terraform/openstack] Fixes for Terraform >=0.13
Terraform >=0.13 gives the following error:
```
Error: Failed to install providers
Could not find required providers, but found possible alternatives:
hashicorp/openstack -> terraform-provider-openstack/openstack
```
This patch fixes these errors.
This fix was tested as follows:
```
rm -rf .terraform && terraform0.12.26 init && terraform0.12.26 validate
rm -rf .terraform && terraform0.13.5 init && terraform0.13.5 validate
rm -rf .terraform && terraform0.14.3 init && terraform0.14.3 validate
```
which gave no errors nor warnings for Terraform 0.13.5 and Terraform
0.14.3. Unfortunately, 0.12.x gives a harmless warning, but
with 0.14.3 out the door, I guess we need to move on.
* [terraform/packet] Fixes for Terraform >=0.13
This fix was tested as follows:
```
export PACKET_AUTH_TOKEN=blah-blah
rm -rf .terraform && terraform0.12.26 init && terraform0.12.26 validate
rm -rf .terraform && terraform0.13.5 init && terraform0.13.5 validate
rm -rf .terraform && terraform0.14.3 init && terraform0.14.3 validate
```
Errors are gone, but warnings still remain. It is impossible to please
all three versions of Terraform.
* Add tests for Terraform >=0.13
Now markdownlint covers ./README.md and md files under ./docs only.
However we have a lot of md files under different directories also.
This enables markdownlint for other md files also.
* fix flake8 errors in Kubespray CI - tox-inventory-builder
* Invalidate CRI-O kubic repo's cache
Signed-off-by: Victor Morales <v.morales@samsung.com>
* add support to configure pkg install retries
and use in CI job tf-ovh_ubuntu18-calico (due to it failing often)
* Switch Calico, Cilium and MetalLB image repos to Quay.io
Co-authored-by: Victor Morales <v.morales@samsung.com>
Co-authored-by: Barry Melbourne <9964974+bmelbourne@users.noreply.github.com>
* Add note about changing private IP in admin.conf.
When I run kubespray, a load balancer is created which should be used instead of the ip of the controller node.
* Procedure to find load balancer and update admin.conf
When I run kubespray, a load balancer is used instead of the private ip of the controller.
I kept seeing `TLS handshake error from 10.250.250.158:63770: EOF` from two IP addresses that correlate to my ELB. Changing the health check from TCP to HTTPS stopped the errors from being generated.
It was documented as if it were an Ansible variable, but it is a Terraform variable.
This also means the colon syntax was incorrect. TF variables are assigned with an equals sign.
Co-authored-by: rptaylor <rptaylor@uvic.ca>
This changes MetalLB contrib to one of addons for deploying MetalLB with
Kubernetes cluster deployment. By the default, Kubespray doesn't deploy
MetalLB addon.
inventory_builder creates hosts.yaml file with hostnames like "node1",
"node2", etc. Even if specifying override_system_hostname=false, the
output of "kubectl get nodes" shows those hostnames ("node1", etc.)
without using actual hostnames.
To solve this issue, this adds an option USE_REAL_HOSTNAME to get
actual hostnames when creating hosts.yaml file instead of "node1", etc.
Since MetalLB v0.8[1], metallb:speaker has started publishing an event
nodeAssigned on k8s resource.
To support MetalLB v0.8+, this allows metallb:speaker to create events.
[1]: 5cc6e23776 (diff-60053ad6fecb5a3cfabb6f3d9e720899R246)
If running MetalLB v0.7.3 on k8s v1.18.2, metallb pods output the
following parsing error of v1.ServiceList:
$ kubectl logs controller-dbb46cf84-fw8h8 -n metallb-system
{
"caller":"reflector.go:205",
"level":"error",
"msg":"go.universe.tf/metallb/internal/k8s/k8s.go:231:
Failed to list *v1.Service: v1.ServiceList:
Items: []v1.Service: v1.Service: ObjectMeta:
v1.ObjectMeta: readObjectFieldAsBytes:
expect : after object field, parsing 1605
Then an external IP address is never allocated to the Service of
LoadBalancer type.
By updating MetalLB version to the latest v0.9[1] today, this issue
can be solved.
[1]: https://hub.docker.com/r/metallb/controller/tags
This updates MetalLB README as following
- Remove unnecessary markdown to read it easily on github
- Make words consistency (kubernetes, loadbalancer)
- Add change-required option
Due to lack of requirements installation on Azure README, the error
can happen:
"The ipaddr filter requires python's netaddr be installed on the
ansible controller"
It is nice to add the installation for Azure users.
apply-rg.sh was for Azure command version 1("azure" command) and the
command is old and version 2("az" command) is officially used today.
apply-rg_2.sh was for the version 2. In addition, the README[1] says
we need to run apply-rg.sh for applying templates.
This renames apply-rg_2.sh to apply-rg.sh for common usages of the
version 2.
[1]: https://github.com/kubernetes-sigs/kubespray/tree/master/contrib/azurerm#generating-and-applying
The ansible-playbook needs to ssh-login to Azure virtual machines with
ssh keypair, and users need to specify ssh_public_keys for their own
ssh public key. The change of ssh_public_keys is mandatory.
So this updates contrib/azurerm/README.md to explain that.
In addition, the path of all.yml was wrong. That also is updated with
this.
apply-rg_2.sh uses 'az group deployment' command but the command is
deprecated like the following warning message:
"This command is implicitly deprecated because command group
'group deployment' is deprecated and will be removed in a future release.
Use 'deployment group' instead."
This updates these deprecated commands.
FYI: The command has been deprecated since [1] on azure-cli side.
[1]: 991cb7cc7c (diff-2057bbb8441166e4910b34b09d22b58cR222)
Cristian Klein
Fredrik Liv
Andrea Zonca
Mateusz Piotrowski
Kenichi Omichi
Fredrik Liv
Cristian Klein
Noam
Pratik Raj
Hans Feldt
Sascha Marcel Schmidt
Hugo Blom
David Medinets
rptaylor
Florent Monbillard
Barry Melbourne
Florian Ruynat
Maxime Guyot
Joel Seguillon
Wang Zhen
Hector S
Samuel Liu
qvicksilver
Pasquale Toscano