kubespray

Commit Graph

Author	SHA1	Message	Date
Matthew Mosesohn	23ae6027ab	remove support for calico v2.x (#4974 ) * Remove support for calico below version v3.0.0 Change-Id: If8fe3036b9e054901a8b2c48516eff1e1271970f * Update main.yml * fixup node peering Change-Id: Ifac4d363deba826f0c80e390ce80a28df9827323 * fixups Change-Id: Ic35417330af6741962003b3930604393c90804d1 * fixups Change-Id: I0ea82d634bb0c81d9b7dc50569c70988bc8d3a3b	5 years ago
Matthew Mosesohn	fd9bbcb157	Enable nodes to run calicoctl for calico kdd mode (#4956 ) * Enable nodes to run calicoctl per-node tasks require waiting for calico-node to be applied Change-Id: Ibe1076b7334a2da0332f2dd766fde0c3f172d1f2 * cleanup tasks that should run on master Change-Id: I43a837879ef41596f14657ecd7f813899b6865ae * Switch run_once calico logic to just run on first master Change-Id: I6893711e354f63c5e1eaf6ac2e23d9a6347a555d	5 years ago
Julian Tabel	dc16ab92f4	fix for calico with kdd datastore (#4922 ) * fix for calico with kdd datastore * remove AS number from daemonset * revert changes to canal * additionnal fixes for kdd datastore in calico	5 years ago
Matthew Mosesohn	4348e78b24	Enable kubeadm etcd mode (#4818 ) * Enable kubeadm etcd mode Uses cert commands from kubeadm experimental control plane to enable non-master nodes to obtain etcd certs. Related story: PROD-29434 Change-Id: Idafa1d223e5c6ceadf819b6f9c06adf4c4f74178 * Add validation checks and exclude calico kdd mode Change-Id: Ic234f5e71261d33191376e70d438f9f6d35f358c * Move etcd mode test to ubuntu flannel HA job Change-Id: I9af6fd80a1bbb1692ab10d6da095eb368f6bc732 * rename etcd_mode to etcd_kubeadm_enabled Change-Id: Ib196d6c8a52f48cae370b026f7687ff9ca69c172	6 years ago
MarkusTeufelberger	e67f848abc	ansible-lint: add spaces around variables [E206] (#4699 )	6 years ago
grialeyur	82119ca923	Add support calico kubernetes datastore and typha. (#4498 ) * Add support calico kubernetes datastore and typha. * Add typha_enabled to kubespray-defaults.	6 years ago
Matthew Mosesohn	05dc2b3a09	Use K8s 1.14 and add kubeadm experimental control plane mode (#4514 ) * Use K8s 1.14 and add kubeadm experimental control plane mode This reverts commit `d39c273d96`. * Cleanup kubeadm setup run on first master * pin kubeadm_certificate_key in test * Remove kubelet autolabel of kube-node, add symlink for pki dir Change-Id: Id5e74dd667c60675dbfe4193b0bc9fb44380e1ca	6 years ago
andreyshestakov	78f6f6b889	Mark "Calico \| Set global as_num" as "unchanged" (#4539 ) This command executes with "--skip-exists" parameter, so it is idempotent and should not be marked as "changed".	6 years ago
Matthew Mosesohn	c5fb734098	Switch calicoctl from a container to a binary (#4524 )	6 years ago
Matthew Mosesohn	d39c273d96	Revert "Use K8s 1.14 and add kubeadm experimental control plane mode (#4317 )" (#4510 ) This reverts commit `316508626d`.	6 years ago
Matthew Mosesohn	316508626d	Use K8s 1.14 and add kubeadm experimental control plane mode (#4317 ) * Use Kubernetes 1.14 and experimental control plane support * bump to v1.14.0	6 years ago
Matthew Mosesohn	4fe2aa6bf7	Use install_cni init container for cni copy for calico/canal (#4416 )	6 years ago
chadswilson	d469282f1c	add blockSize to IPPool spec for Calico >= v3.3.0 (#4224 ) * add blockSize to IPPool spec for Calico >= v3.3.0 * fix "cidr" spec in Calico IPPool resource for my PR	6 years ago
Matthew Mosesohn	acbf3db233	Remove hard dependence on facts for all nodes (#4304 ) * Remove hard dependence on facts for all nodes * Update main.yaml * Update main.yaml	6 years ago
hikoz	67832aada9	changed_when:false (#4189 )	6 years ago
hikoz	9a91ef8628	change permission after unarchive (#4191 )	6 years ago
Erwan Miran	f6d60a7e89	Calico: Ability to define the default IPPool CIDR (instead of kube_pods_subnet) (#4131 ) * Calico: Ability to define the default IPPool CIDR (instead of kube_pods_subnet) * Documentation for calico_pool_cidr (and calico_advertise_cluster_ips which has been forgotten...)	6 years ago
wangxf	a096761306	[PR-Calico]Support calico 3.4.0 (#4102 ) * Suport calico 3.4.0 Signed-off-by: wangxf1987 <xiaofeix.wang@gmail.com> * Remove symlink + cni conflist template when 3.3.0+, handle Canal, addition of install-cni: sidecar(3.3.0) or initontainer(3.4.0), KUBECONFIG_FILEPATH, calico_cert_dir, advertise cluster ips * scheduler.alpha.kubernetes.io/critical-pod deprecated since 1.12	6 years ago
Rong Zhang	e0781483fa	Use download binary instead of copying from the container (#3786 )	6 years ago
Erwan Miran	4f12ba00d1	Fix calico peering with router(s) (#3547 )	6 years ago
Erwan Miran	7bec169d58	Fix ansible syntax to avoid ansible deprecation warnings (#3512 ) * failed * version_compare * succeeded * skipped * success * version_compare becomes version since ansible 2.5 * ansible minimal version updated in doc and spec * last version_compare	6 years ago
Erwan Miran	bfd4ccbeaa	Calico: Ability to define global peers (#3493 )	6 years ago
Erwan Miran	6549b8f8ae	Ability to define the asNumber on a per node basis when route reflectors are not used in order to peer directly with routers (#3492 )	6 years ago
Erwan Miran	232020ef96	skip-exists is an flag for create command, not for calicoctl (#3401 )	6 years ago
Kevin Schuck	fb1678d425	Ensures BGPPeer resource names are unique	6 years ago
Kevin Schuck	d3adf09bde	Fixes BGPPeer resource for calico >= 3.0.0	6 years ago
Matthew Mosesohn	c83350e597	refactor to base on calico_version	6 years ago
Matthew Mosesohn	55d76ea3d8	Update install.yml	6 years ago
Matthew Mosesohn	1091e82327	Update install.yml	6 years ago
Matthew Mosesohn	cc79125d3e	Update install.yml	6 years ago
Matthew Mosesohn	d91f9e14e6	Put back legacy support for calico ippools and bgp settings	6 years ago
Takashi Okamoto	b2a7a27dfb	Fix indent error by yamllint.	6 years ago
mlushpenko	ea2c9d8f57	Fix yaml checks	6 years ago
Matthew Mosesohn	dc3e317d20	Fix backward compatibility with calico 2.6	6 years ago
Luis Nunez	6569180654	remove capitalize filter	6 years ago
Aivars Sterns	23fd3461bc	calico upgrade to v3 (#3086 ) * calico upgrade to v3 * update calico_rr version * add missing file * change contents of main.yml as it was left old version * enable network policy by default * remove unneeded task * Fix kubelet calico settings * fix when statement * switch back to node-kubeconfig.yaml	6 years ago
Wong Hoi Sing Edison	c3b3572025	Always create service account even rbac_enabled = false	6 years ago
Matthew Mosesohn	1a3b9dd864	Force copy cni files	7 years ago
elementyang	8fee1ab102	change create to apply	7 years ago
Matthew Mosesohn	9837b7926f	Use proper lookup of etcd host for calico (#2408 ) Fixes #2397	7 years ago
Matthew Mosesohn	bc0fc5df98	Use node cert for etcd tasks instead of delegating to first etcd (#2386 ) For etcdctl commands, use admin cert instead of node because this file doesn't exist on etcd only hosts.	7 years ago
Brad Beam	31659efe13	Fixing cert name in calico/canal for etcd check (#2358 )	7 years ago
Matthew Mosesohn	87f33a4644	Use CNI to assign kube_pods_subnet for calico Now calico can be deployed if there are other existing pools and not confuse IPAM and end up with pods in the wrong pools.	7 years ago
Matthew Mosesohn	d2935ffed0	Optionally ignore the presence of extra calico pools (#2190 )	7 years ago
Steve Mitchell	e45b30d033	Add etcd key and cert environment variables for use with client auth	7 years ago
Matthew Mosesohn	ec54b36e05	add retries for calico/canal etcd commands (#2007 )	7 years ago
Spencer Smith	bc1a4e12ad	fix broken variable in ansible 2.4.1.0 and ensure tasks for calico-rr (#1982 )	7 years ago
Matthew Mosesohn	86fb669fd3	Idempotency fixes (#1838 )	7 years ago
Matthew Mosesohn	d4b10eb9f5	Fix path for calico get node names (#1816 )	7 years ago
Kevin Lefevre	6ec45b10f1	Update network-plugins to use portmap plugin (#1763 ) Portmap allow to use hostPort with CNI plugins. Should fix #1675	7 years ago

35 Commits (23ae6027ab3e7cd1a7c8f25b13178d94f208135f)