Added CoreDNS to downloads
Updated with labels. Should now work without RBAC too
Fix DNS settings on hosts
Rename CoreDNS service from kube-dns to coredns
Add rotate based on http://edgeofsanity.net/rant/2017/12/20/systemd-resolved-is-broken.html
Updated docs with CoreDNS info
Added labels and fixed minor settings from official yaml file: https://github.com/kubernetes/kubernetes/blob/release-1.9/cluster/addons/dns/coredns.yaml.sed
Added a secondary deployment and secondary service ip. This is to mitigate dns timeouts and create high resitency for failures. See discussion at 'https://github.com/coreos/coreos-kubernetes/issues/641#issuecomment-281174806'
Set dns list correct. Thanks to @whereismyjetpack
Only download KubeDNS or CoreDNS if selected
Move dns cleanup to its own file and import tasks based on dns mode
Fix install of KubeDNS when dnsmask_kubedns mode is selected
Add new dns option coredns_dual for dual stack deployment. Added variable to configure replicas deployed. Updated docs for dual stack deployment. Removed rotate option in resolv.conf.
Run DNS manifests for CoreDNS and KubeDNS
Set skydns servers on dual stack deployment
Use only one template for CoreDNS dual deployment
Set correct cluster ip for the dns server
* Fix HA docs API access endpoints explained
Follow-up commit 81347298a3
and fix the endpoint value provided in HA docs.
Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>
* Clarify internal LB with external LB use case
* Clarify how to use both internal and external, non-cluster aware and
not managed with Kubespray, LB solutions.
* Clarify the requirements, like TLS/SSL termination, for such an external LB.
Unlike to the 'cluster-aware' external LB config, endpoints' security must be
managed by that non-cluster aware external LB.
* Note that masters always contact their local apiservers via https://bip:sp.
It's highly unlikely to go down and it reduces latency that might be
introduced when going host->lb->host. Only computes go that path.
Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>
* Add a note for supplementary_addresses_in_ssl_keys
Explain how to benefit from supplementary_addresses_in_ssl_keys
Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>
Auto configure API access endpoint with a custom bind IP, if provided.
Fix HA docs' http URLs are https in fact, clarify the insecure vs secure
API access modes as well.
Closes: #issues/2051
Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>
* Allow setting --bind-address for apiserver hyperkube
This is required if you wish to configure a loadbalancer (e.g haproxy)
running on the master nodes without choosing a different port for the
vip from that used by the API - in this case you need the API to bind to
a specific interface, then haproxy can bind the same port on the VIP:
root@overcloud-controller-0 ~]# netstat -taupen | grep 6443
tcp 0 0 192.168.24.6:6443 0.0.0.0:* LISTEN 0 680613 134504/haproxy
tcp 0 0 192.168.24.16:6443 0.0.0.0:* LISTEN 0 653329 131423/hyperkube
tcp 0 0 192.168.24.16:6443 192.168.24.16:58404 ESTABLISHED 0 652991 131423/hyperkube
tcp 0 0 192.168.24.16:58404 192.168.24.16:6443 ESTABLISHED 0 652986 131423/hyperkube
This can be achieved e.g via:
kube_apiserver_bind_address: 192.168.24.16
* Address code review feedback
* Update kube-apiserver.manifest.j2
* Add Contiv support
Contiv is a network plugin for Kubernetes and Docker. It supports
vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies,
multiple networks and bridging pods onto physical networks.
* Update contiv version to 1.1.4
Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config.
* Load openvswitch module to workaround on CentOS7.4
* Set contiv cni version to 0.1.0
Correct contiv CNI version to 0.1.0.
* Use kube_apiserver_endpoint for K8S_API_SERVER
Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks
to a available endpoint no matter if there's a loadbalancer or not.
* Make contiv use its own etcd
Before this commit, contiv is using a etcd proxy mode to k8s etcd,
this work fine when the etcd hosts are co-located with contiv etcd
proxy, however the k8s peering certs are only in etcd group, as a
result the etcd-proxy is not able to peering with the k8s etcd on
etcd group, plus the netplugin is always trying to find the etcd
endpoint on localhost, this will cause problem for all netplugins
not runnign on etcd group nodes.
This commit make contiv uses its own etcd, separate from k8s one.
on kube-master nodes (where net-master runs), it will run as leader
mode and on all rest nodes it will run as proxy mode.
* Use cp instead of rsync to copy cni binaries
Since rsync has been removed from hyperkube, this commit changes it
to use cp instead.
* Make contiv-etcd able to run on master nodes
* Add rbac_enabled flag for contiv pods
* Add contiv into CNI network plugin lists
* migrate contiv test to tests/files
Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
* Add required rules for contiv netplugin
* Better handling json return of fwdMode
* Make contiv etcd port configurable
* Use default var instead of templating
* roles/download/defaults/main.yml: use contiv 1.1.7
Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
* Defaults for apiserver_loadbalancer_domain_name
When loadbalancer_apiserver is defined, use the
apiserver_loadbalancer_domain_name with a given default value.
Fix unconsistencies for checking if apiserver_loadbalancer_domain_name
is defined AND using it with a default value provided at once.
Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>
* Define defaults for LB modes in common defaults
Adjust the defaults for apiserver_loadbalancer_domain_name and
loadbalancer_apiserver_localhost to come from a single source, which is
kubespray-defaults. Removes some confusion and simplefies the code.
Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>
* Change deprecated vagrant ansible flag 'sudo' to 'become'
* Emphasize, that the name of the pip_pyton_modules is only considered in coreos
* Remove useless unused variable
* Fix warning when jinja2 template-delimiters used in when statement
There is no need for jinja2 template-delimiters like {{ }} or {% %}
any more. They can just be omitted as described in https://github.com/ansible/ansible/issues/22397
* Fix broken link in getting-started guide
Jerry Elmore
Miouge1
Matthew Mosesohn
Matthew Mosesohn
Mark Eisenblaetter
amaya
Alireza David
Tommy Kindmark
Markos Chandras
Cédric de Saint Martin
oz123
Arslanbekov Denis
Markos Chandras
Erwan Miran
Erwan SEITE
mirwan
woopstar
rong.zhang
Wong Hoi Sing Edison
zhengchuan hu
David Miller
Eduardo Baitello
Merouane Atig
Spencer Smith
Julian Hübenthal
Bogdan Dobrelya
Aaron Crickenberger
Steven Hardy
unclejack
Chad Swenson
abelgana
Amit Kumar Jaiswal
Günther Grill
Fernando Ripoll
neith00