Merge pull request #2332 from hswong3i/registry_fixup

Registry Addon Fixup

inventory/sample/group_vars/k8s-cluster.yml

@@ -171,6 +171,9 @@ istio_enabled: false
 
 # Registry deployment
 registry_enabled: false
+# registry_namespace: "{{ system_namespace }}"
+# registry_storage_class: ""
+# registry_disk_size: "10Gi"
 
 # Local volume provisioner deployment
 local_volume_provisioner_enabled: false

roles/kubernetes-apps/registry/README.md

@@ -1,36 +1,39 @@
-# Private Docker Registry in Kubernetes
+Private Docker Registry in Kubernetes
+=====================================
 
 Kubernetes offers an optional private Docker registry addon, which you can turn
-on when you bring up a cluster or install later.  This gives you a place to
+on when you bring up a cluster or install later. This gives you a place to
 store truly private Docker images for your cluster.
 
-## How it works
+How it works
+------------
 
-The private registry runs as a `Pod` in your cluster.  It does not currently
+The private registry runs as a `Pod` in your cluster. It does not currently
 support SSL or authentication, which triggers Docker's "insecure registry"
-logic.  To work around this, we run a proxy on each node in the cluster,
+logic. To work around this, we run a proxy on each node in the cluster,
 exposing a port onto the node (via a hostPort), which Docker accepts as
 "secure", since it is accessed by `localhost`.
 
-## Turning it on
+Turning it on
+-------------
 
-Some cluster installs (e.g. GCE) support this as a cluster-birth flag.  The
+Some cluster installs (e.g. GCE) support this as a cluster-birth flag. The
 `ENABLE_CLUSTER_REGISTRY` variable in `cluster/gce/config-default.sh` governs
-whether the registry is run or not.  To set this flag, you can specify
-`KUBE_ENABLE_CLUSTER_REGISTRY=true` when running `kube-up.sh`.  If your cluster
-does not include this flag, the following steps should work.  Note that some of
+whether the registry is run or not. To set this flag, you can specify
+`KUBE_ENABLE_CLUSTER_REGISTRY=true` when running `kube-up.sh`. If your cluster
+does not include this flag, the following steps should work. Note that some of
 this is cloud-provider specific, so you may have to customize it a bit.
 
 ### Make some storage
 
-The primary job of the registry is to store data.  To do that we have to decide
-where to store it.  For cloud environments that have networked storage, we can
-use Kubernetes's `PersistentVolume` abstraction.  The following template is
+The primary job of the registry is to store data. To do that we have to decide
+where to store it. For cloud environments that have networked storage, we can
+use Kubernetes's `PersistentVolume` abstraction. The following template is
 expanded by `salt` in the GCE cluster turnup, but can easily be adapted to
 other situations:
 
 <!-- BEGIN MUNGE: EXAMPLE registry-pv.yaml.in -->
-```yaml
+``` yaml
 kind: PersistentVolume
 apiVersion: v1
 metadata:
@@ -64,14 +67,15 @@ just want to kick the tires on this without committing to it, you can easily
 adapt the `ReplicationController` specification below to use a simple
 `emptyDir` volume instead of a `persistentVolumeClaim`.
 
-## Claim the storage
+Claim the storage
+-----------------
 
 Now that the Kubernetes cluster knows that some storage exists, you can put a
-claim on that storage.  As with the `PersistentVolume` above, you can start
+claim on that storage. As with the `PersistentVolume` above, you can start
 with the `salt` template:
 
 <!-- BEGIN MUNGE: EXAMPLE registry-pvc.yaml.in -->
-```yaml
+``` yaml
 kind: PersistentVolumeClaim
 apiVersion: v1
 metadata:
@@ -90,15 +94,16 @@ spec:
 
 This tells Kubernetes that you want to use storage, and the `PersistentVolume`
 you created before will be bound to this claim (unless you have other
-`PersistentVolumes` in which case those might get bound instead).  This claim
+`PersistentVolumes` in which case those might get bound instead). This claim
 gives you the right to use this storage until you release the claim.
 
-## Run the registry
+Run the registry
+----------------
 
 Now we can run a Docker registry:
 
 <!-- BEGIN MUNGE: EXAMPLE registry-rc.yaml -->
-```yaml
+``` yaml
 apiVersion: v1
 kind: ReplicationController
 metadata:
@@ -146,12 +151,13 @@ spec:
 ```
 <!-- END MUNGE: EXAMPLE registry-rc.yaml -->
 
-## Expose the registry in the cluster
+Expose the registry in the cluster
+----------------------------------
 
 Now that we have a registry `Pod` running, we can expose it as a Service:
 
 <!-- BEGIN MUNGE: EXAMPLE registry-svc.yaml -->
-```yaml
+``` yaml
 apiVersion: v1
 kind: Service
 metadata:
@@ -171,14 +177,15 @@ spec:
 ```
 <!-- END MUNGE: EXAMPLE registry-svc.yaml -->
 
-## Expose the registry on each node
+Expose the registry on each node
+--------------------------------
 
 Now that we have a running `Service`, we need to expose it onto each Kubernetes
-`Node` so that Docker will see it as `localhost`.  We can load a `Pod` on every
+`Node` so that Docker will see it as `localhost`. We can load a `Pod` on every
 node by creating following daemonset.
 
 <!-- BEGIN MUNGE: EXAMPLE ../../saltbase/salt/kube-registry-proxy/kube-registry-proxy.yaml -->
-```yaml
+``` yaml
 apiVersion: extensions/v1beta1
 kind: DaemonSet
 metadata:
@@ -217,7 +224,7 @@ spec:
 <!-- END MUNGE: EXAMPLE ../../saltbase/salt/kube-registry-proxy/kube-registry-proxy.yaml -->
 
 When modifying replication-controller, service and daemon-set defintions, take
-care to ensure _unique_ identifiers for the rc-svc couple and the daemon-set.
+care to ensure *unique* identifiers for the rc-svc couple and the daemon-set.
 Failing to do so will have register the localhost proxy daemon-sets to the
 upstream service. As a result they will then try to proxy themselves, which
 will, for obvious reasons, not work.
@@ -226,29 +233,30 @@ This ensures that port 5000 on each node is directed to the registry `Service`.
 You should be able to verify that it is running by hitting port 5000 with a web
 browser and getting a 404 error:
 
-```console
+``` console
 $ curl localhost:5000
 404 page not found
 ```
 
-## Using the registry
+Using the registry
+------------------
 
 To use an image hosted by this registry, simply say this in your `Pod`'s
 `spec.containers[].image` field:
 
-```yaml
+``` yaml
     image: localhost:5000/user/container
 ```
 
 Before you can use the registry, you have to be able to get images into it,
-though.  If you are building an image on your Kubernetes `Node`, you can spell
-out `localhost:5000` when you build and push.  More likely, though, you are
+though. If you are building an image on your Kubernetes `Node`, you can spell
+out `localhost:5000` when you build and push. More likely, though, you are
 building locally and want to push to your cluster.
 
 You can use `kubectl` to set up a port-forward from your local node to a
 running Pod:
 
-```console
+``` console
 $ POD=$(kubectl get pods --namespace kube-system -l k8s-app=kube-registry-upstream \
             -o template --template '{{range .items}}{{.metadata.name}} {{.status.phase}}{{"\n"}}{{end}}' \
             | grep Running | head -1 | cut -f1 -d' ')
@@ -260,15 +268,14 @@ Now you can build and push images on your local computer as
 `localhost:5000/yourname/container` and those images will be available inside
 your kubernetes cluster with the same name.
 
-# More Extensions
+More Extensions
+===============
 
-- [Use GCS as storage backend](gcs/README.md)
-- [Enable TLS/SSL](tls/README.md)
-- [Enable Authentication](auth/README.md)
+-   [Use GCS as storage backend](gcs/README.md)
+-   [Enable TLS/SSL](tls/README.md)
+-   [Enable Authentication](auth/README.md)
 
-## Future improvements
+Future improvements
+-------------------
 
-* Allow port-forwarding to a Service rather than a pod (#15180)
-
-
-[![Analytics](https://kubernetes-site.appspot.com/UA-36037335-10/GitHub/cluster/addons/registry/README.md?pixel)]()
+-   Allow port-forwarding to a Service rather than a pod (\#15180)

roles/kubernetes-apps/registry/defaults/main.yml

@@ -3,3 +3,7 @@ registry_image_repo: registry
 registry_image_tag: 2.6
 registry_proxy_image_repo: gcr.io/google_containers/kube-registry-proxy
 registry_proxy_image_tag: 0.4
+
+registry_namespace: "{{ system_namespace }}"
+registry_storage_class: ""
+registry_disk_size: "10Gi"

roles/kubernetes-apps/registry/files/images/Dockerfile

@@ -1,26 +0,0 @@
-# Copyright 2016 The Kubernetes Authors.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-FROM nginx:1.12
-
-RUN apt-get update \
-	&& apt-get install -y \
-		curl \
-		--no-install-recommends \
-	&& apt-get clean \
-	&& rm -rf /var/lib/apt/lists/* /tmp/* /var/tmp/* /usr/share/man /usr/share/doc
-
-COPY rootfs /
-
-CMD ["/bin/boot"]

roles/kubernetes-apps/registry/files/images/Makefile

@@ -1,24 +0,0 @@
-# Copyright 2016 The Kubernetes Authors.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-.PHONY: build push vet test clean
-
-TAG = 0.4
-REPO = gcr.io/google_containers/kube-registry-proxy
-
-build:
-	docker build --pull -t $(REPO):$(TAG) .
-
-push:
-	gcloud docker -- push $(REPO):$(TAG)

roles/kubernetes-apps/registry/files/images/rootfs/bin/boot

@@ -1,23 +0,0 @@
-#!/usr/bin/env bash
-
-# fail if no hostname is provided
-REGISTRY_HOST=${REGISTRY_HOST:?no host}
-REGISTRY_PORT=${REGISTRY_PORT:-5000}
-
-# we are always listening on port 80
-# https://github.com/nginxinc/docker-nginx/blob/43c112100750cbd1e9f2160324c64988e7920ac9/stable/jessie/Dockerfile#L25
-PORT=80
-
-sed -e "s/%HOST%/$REGISTRY_HOST/g" \
-	-e "s/%PORT%/$REGISTRY_PORT/g" \
-	-e "s/%BIND_PORT%/$PORT/g" \
-	</etc/nginx/conf.d/default.conf.in >/etc/nginx/conf.d/default.conf
-
-# wait for registry to come online
-while ! curl -sS "$REGISTRY_HOST:$REGISTRY_PORT" &>/dev/null; do
-	printf "waiting for the registry (%s:%s) to come online...\n" "$REGISTRY_HOST" "$REGISTRY_PORT"
-	sleep 1
-done
-
-printf "starting proxy...\n"
-exec nginx -g "daemon off;" "$@"

roles/kubernetes-apps/registry/files/images/rootfs/etc/nginx/conf.d/default.conf.in

@@ -1,28 +0,0 @@
-# Docker registry proxy for api version 2
-
-upstream docker-registry {
-    server %HOST%:%PORT%;
-}
-
-# No client auth or TLS
-# TODO(bacongobbler): experiment with authenticating the registry if it's using TLS
-server {
-    listen %BIND_PORT%;
-    server_name localhost;
-
-    # disable any limits to avoid HTTP 413 for large image uploads
-    client_max_body_size 0;
-
-    # required to avoid HTTP 411: see Issue #1486 (https://github.com/docker/docker/issues/1486)
-    chunked_transfer_encoding on;
-
-    location / {
-        # Do not allow connections from docker 1.5 and earlier
-        # docker pre-1.6.0 did not properly set the user agent on ping, catch "Go *" user agents
-        if ($http_user_agent ~ "^(docker\/1\.(3|4|5(?!\.[0-9]-dev))|Go ).*$" ) {
-            return 404;
-        }
-
-        include docker-registry.conf;
-    }
-}

roles/kubernetes-apps/registry/files/images/rootfs/etc/nginx/docker-registry.conf

@@ -1,6 +0,0 @@
-proxy_pass                          http://docker-registry;
-proxy_set_header  Host              $http_host;   # required for docker client's sake
-proxy_set_header  X-Real-IP         $remote_addr; # pass on real client's IP
-proxy_set_header  X-Forwarded-For   $proxy_add_x_forwarded_for;
-proxy_set_header  X-Forwarded-Proto $scheme;
-proxy_read_timeout                  900;

roles/kubernetes-apps/registry/files/images/rootfs/etc/nginx/nginx.conf

@@ -1,26 +0,0 @@
-user nginx;
-worker_processes auto;
-
-error_log   /var/log/nginx/error.log    warn;
-pid         /var/run/nginx.pid;
-
-events {
-    worker_connections  1024;
-}
-
-http {
-    include      /etc/nginx/mime.types;
-    default_type application/octet-stream;
-
-    log_format  main  '$remote_addr - $remote_user [$time_local] "$request" '
-                      '$status $body_bytes_sent "$http_referer" '
-                      '"$http_user_agent" "$http_x_forwarded_for"';
-
-    access_log  /var/log/nginx/access.log main;
-
-    sendfile on;
-
-    keepalive_timeout 65;
-
-    include /etc/nginx/conf.d/*.conf;
-}

roles/kubernetes-apps/registry/tasks/main.yml

@@ -3,29 +3,56 @@
 - name: Registry | Create addon dir
   file:
     path: "{{ kube_config_dir }}/addons/registry"
+    state: directory
     owner: root
     group: root
     mode: 0755
-    recurse: true
 
 - name: Registry | Create manifests
   template:
     src: "{{ item.file }}.j2"
     dest: "{{ kube_config_dir }}/addons/registry/{{ item.file }}"
   with_items:
-    - { name: registry-svc, file: registry-svc.yml, type: service }
-    - { name: registry-rc, file: registry-rc.yml, type: replicationcontroller }
-    - { name: registry-ds, file: registry-ds.yml, type: daemonset }
+    - { name: registry-ns, file: registry-ns.yml, type: ns }
+    - { name: registry-svc, file: registry-svc.yml, type: svc }
+    - { name: registry-rs, file: registry-rs.yml, type: rs }
+    - { name: registry-proxy-ds, file: registry-proxy-ds.yml, type: ds }
   register: registry_manifests
   when: inventory_hostname == groups['kube-master'][0]
 
 - name: Registry | Apply manifests
   kube:
     name: "{{ item.item.name }}"
-    namespace: "{{ system_namespace }}"
+    namespace: "{{ registry_namespace }}"
     kubectl: "{{ bin_dir }}/kubectl"
     resource: "{{ item.item.type }}"
     filename: "{{ kube_config_dir }}/addons/registry/{{ item.item.file }}"
     state: "latest"
   with_items: "{{ registry_manifests.results }}"
   when: inventory_hostname == groups['kube-master'][0]
+
+- name: Registry | Create PVC manifests
+  template:
+    src: "{{ item.file }}.j2"
+    dest: "{{ kube_config_dir }}/addons/registry/{{ item.file }}"
+  with_items:
+    - { name: registry-pvc, file: registry-pvc.yml, type: pvc }
+  register: registry_manifests
+  when:
+    - registry_storage_class != none
+    - registry_disk_size != none
+    - inventory_hostname == groups['kube-master'][0]
+
+- name: Registry | Apply PVC manifests
+  kube:
+    name: "{{ item.item.name }}"
+    namespace: "{{ registry_namespace }}"
+    kubectl: "{{ bin_dir }}/kubectl"
+    resource: "{{ item.item.type }}"
+    filename: "{{ kube_config_dir }}/addons/registry/{{ item.item.file }}"
+    state: "latest"
+  with_items: "{{ registry_manifests.results }}"
+  when:
+    - registry_storage_class != none
+    - registry_disk_size != none
+    - inventory_hostname == groups['kube-master'][0]

roles/kubernetes-apps/registry/templates/auth/README.md

@@ -1,92 +0,0 @@
-# Enable Authentication with Htpasswd for Kube-Registry 
-
-Docker registry support a few authentication providers. Full list of supported provider can be found [here](https://docs.docker.com/registry/configuration/#auth). This document describes how to enable authentication with htpasswd for kube-registry. 
-
-### Prepare Htpasswd Secret
-
-Please generate your own htpasswd file. Assuming the file you generated is `htpasswd`. 
-Creating secret to hold htpasswd...
-```console
-$ kubectl --namespace=kube-system create secret generic registry-auth-secret --from-file=htpasswd=htpasswd
-```
-
-### Run Registry
-
-Please be noted that this sample rc is using emptyDir as storage backend for simplicity. 
-
-<!-- BEGIN MUNGE: EXAMPLE registry-auth-rc.yaml -->
-```yaml
-apiVersion: v1
-kind: ReplicationController
-metadata:
-  name: kube-registry-v0
-  namespace: kube-system
-  labels:
-    k8s-app: kube-registry
-    version: v0
-#    kubernetes.io/cluster-service: "true"
-spec:
-  replicas: 1
-  selector:
-    k8s-app: kube-registry
-    version: v0
-  template:
-    metadata:
-      labels:
-        k8s-app: kube-registry
-        version: v0
-#        kubernetes.io/cluster-service: "true"
-    spec:
-      containers:
-      - name: registry
-        image: registry:2
-        resources:
-          # keep request = limit to keep this container in guaranteed class
-          limits:
-            cpu: 100m
-            memory: 100Mi
-          requests:
-            cpu: 100m
-            memory: 100Mi
-        env:
-        - name: REGISTRY_HTTP_ADDR
-          value: :5000
-        - name: REGISTRY_STORAGE_FILESYSTEM_ROOTDIRECTORY
-          value: /var/lib/registry
-        - name: REGISTRY_AUTH_HTPASSWD_REALM
-          value: basic_realm
-        - name: REGISTRY_AUTH_HTPASSWD_PATH
-          value: /auth/htpasswd
-        volumeMounts:
-        - name: image-store
-          mountPath: /var/lib/registry
-        - name: auth-dir
-          mountPath: /auth
-        ports:
-        - containerPort: 5000
-          name: registry
-          protocol: TCP
-      volumes:
-      - name: image-store
-        emptyDir: {}
-      - name: auth-dir
-        secret:
-          secretName: registry-auth-secret
-```
-<!-- END MUNGE: EXAMPLE registry-auth-rc.yaml -->
-
-No changes are needed for other components (kube-registry service and proxy). 
-
-### To Verify
-
-Setup proxy or port-forwarding to the kube-registry. Image push/pull should fail without authentication. Then use `docker login` to authenticate with kube-registry and see if it works.
-
-### Configure Nodes to Authenticate with Kube-Registry
-
-By default, nodes assume no authentication is required by kube-registry. Without authentication, nodes cannot pull images from kube-registry. To solve this, more documentation can be found [Here](https://github.com/kubernetes/kubernetes.github.io/blob/master/docs/concepts/containers/images.md#configuring-nodes-to-authenticate-to-a-private-repository).
-
-
-
-
-
-[![Analytics](https://kubernetes-site.appspot.com/UA-36037335-10/GitHub/cluster/addons/registry/auth/README.md?pixel)]()

roles/kubernetes-apps/registry/templates/auth/registry-auth-rc.yml.j2

@@ -1,56 +0,0 @@
-apiVersion: v1
-kind: ReplicationController
-metadata:
-  name: kube-registry-v0
-  namespace: kube-system
-  labels:
-    k8s-app: kube-registry
-    version: v0
-#    kubernetes.io/cluster-service: "true"
-spec:
-  replicas: 1
-  selector:
-    k8s-app: kube-registry
-    version: v0
-  template:
-    metadata:
-      labels:
-        k8s-app: kube-registry
-        version: v0
-#        kubernetes.io/cluster-service: "true"
-    spec:
-      containers:
-      - name: registry
-        image: registry:2
-        resources:
-          # keep request = limit to keep this container in guaranteed class
-          limits:
-            cpu: 100m
-            memory: 100Mi
-          requests:
-            cpu: 100m
-            memory: 100Mi
-        env:
-        - name: REGISTRY_HTTP_ADDR
-          value: :5000
-        - name: REGISTRY_STORAGE_FILESYSTEM_ROOTDIRECTORY
-          value: /var/lib/registry
-        - name: REGISTRY_AUTH_HTPASSWD_REALM
-          value: basic_realm
-        - name: REGISTRY_AUTH_HTPASSWD_PATH
-          value: /auth/htpasswd
-        volumeMounts:
-        - name: image-store
-          mountPath: /var/lib/registry
-        - name: auth-dir
-          mountPath: /auth
-        ports:
-        - containerPort: 5000
-          name: registry
-          protocol: TCP
-      volumes:
-      - name: image-store
-        emptyDir: {}
-      - name: auth-dir
-        secret:
-          secretName: registry-auth-secret

roles/kubernetes-apps/registry/templates/gcs/README.md

@@ -1,81 +0,0 @@
-# Kube-Registry with GCS storage backend
-
-Besides local file system, docker registry also supports a number of cloud storage backends. Full list of supported backend can be found [here](https://docs.docker.com/registry/configuration/#storage). This document describes how to enable GCS for kube-registry as storage backend. 
-
-A few preparation steps are needed. 
- 1. Create a bucket named kube-registry in GCS.
- 1. Create a service account for GCS access and create key file in json format. Detail instruction can be found [here](https://cloud.google.com/storage/docs/authentication#service_accounts).
-
-
-### Pack Keyfile into a Secret
-
-Assuming you have downloaded the keyfile as `keyfile.json`. Create secret with the `keyfile.json`...
-```console
-$ kubectl --namespace=kube-system create secret generic gcs-key-secret --from-file=keyfile=keyfile.json
-```
-
-
-### Run Registry
-
-<!-- BEGIN MUNGE: EXAMPLE registry-gcs-rc.yaml -->
-```yaml
-apiVersion: v1
-kind: ReplicationController
-metadata:
-  name: kube-registry-v0
-  namespace: kube-system
-  labels:
-    k8s-app: kube-registry
-    version: v0
-#    kubernetes.io/cluster-service: "true"
-spec:
-  replicas: 1
-  selector:
-    k8s-app: kube-registry
-    version: v0
-  template:
-    metadata:
-      labels:
-        k8s-app: kube-registry
-        version: v0
-#        kubernetes.io/cluster-service: "true"
-    spec:
-      containers:
-      - name: registry
-        image: registry:2
-        resources:
-          # keep request = limit to keep this container in guaranteed class
-          limits:
-            cpu: 100m
-            memory: 100Mi
-          requests:
-            cpu: 100m
-            memory: 100Mi
-        env:
-        - name: REGISTRY_HTTP_ADDR
-          value: :5000
-        - name: REGISTRY_STORAGE
-          value: gcs
-        - name: REGISTRY_STORAGE_GCS_BUCKET
-          value: kube-registry
-        - name: REGISTRY_STORAGE_GCS_KEYFILE
-          value: /gcs/keyfile
-        ports:
-        - containerPort: 5000
-          name: registry
-          protocol: TCP
-        volumeMounts:
-        - name: gcs-key
-          mountPath: /gcs
-      volumes:
-      - name: gcs-key
-        secret:
-          secretName: gcs-key-secret
-```
-<!-- END MUNGE: EXAMPLE registry-gcs-rc.yaml -->
-
-
-No changes are needed for other components (kube-registry service and proxy). 
-
-
-[![Analytics](https://kubernetes-site.appspot.com/UA-36037335-10/GitHub/cluster/addons/registry/gcs/README.md?pixel)]()

roles/kubernetes-apps/registry/templates/gcs/registry-gcs-rc.yml.j2

@@ -1,52 +0,0 @@
-apiVersion: v1
-kind: ReplicationController
-metadata:
-  name: kube-registry-v0
-  namespace: kube-system
-  labels:
-    k8s-app: kube-registry
-    version: v0
-#    kubernetes.io/cluster-service: "true"
-spec:
-  replicas: 1
-  selector:
-    k8s-app: kube-registry
-    version: v0
-  template:
-    metadata:
-      labels:
-        k8s-app: kube-registry
-        version: v0
-#        kubernetes.io/cluster-service: "true"
-    spec:
-      containers:
-      - name: registry
-        image: registry:2
-        resources:
-          # keep request = limit to keep this container in guaranteed class
-          limits:
-            cpu: 100m
-            memory: 100Mi
-          requests:
-            cpu: 100m
-            memory: 100Mi
-        env:
-        - name: REGISTRY_HTTP_ADDR
-          value: :5000
-        - name: REGISTRY_STORAGE
-          value: gcs
-        - name: REGISTRY_STORAGE_GCS_BUCKET
-          value: kube-registry
-        - name: REGISTRY_STORAGE_GCS_KEYFILE
-          value: /gcs/keyfile
-        ports:
-        - containerPort: 5000
-          name: registry
-          protocol: TCP
-        volumeMounts:
-        - name: gcs-key
-          mountPath: /gcs
-      volumes:
-      - name: gcs-key
-        secret:
-          secretName: gcs-key-secret

roles/kubernetes-apps/registry/templates/registry-ns.yml.j2

@@ -0,0 +1,7 @@
+---
+apiVersion: v1
+kind: Namespace
+metadata:
+  name: {{ registry_namespace }}
+  labels:
+    name: {{ registry_namespace }}

roles/kubernetes-apps/registry/templates/registry-ds.yml.j2 → roles/kubernetes-apps/registry/templates/registry-proxy-ds.yml.j2

@@ -1,28 +1,33 @@
 ---
-apiVersion: extensions/v1beta1
+apiVersion: apps/v1
 kind: DaemonSet
 metadata:
-  name: kube-registry-proxy
-  namespace: {{ system_namespace }}
+  name: registry-proxy
+  namespace: {{ registry_namespace }}
   labels:
-    k8s-app: kube-registry-proxy
+    k8s-app: registry-proxy
     kubernetes.io/cluster-service: "true"
     version: v{{ registry_proxy_image_tag }}
 spec:
+  selector:
+    matchLabels:
+      k8s-app: registry-proxy
+      version: v{{ registry_proxy_image_tag }}
   template:
     metadata:
       labels:
-        k8s-app: kube-registry-proxy
-        kubernetes.io/name: "kube-registry-proxy"
+        k8s-app: registry-proxy
+        kubernetes.io/name: "registry-proxy"
         kubernetes.io/cluster-service: "true"
         version: v{{ registry_proxy_image_tag }}
     spec:
       containers:
-        - name: kube-registry-proxy
+        - name: registry-proxy
           image: {{ registry_proxy_image_repo }}:{{ registry_proxy_image_tag }}
+          imagePullPolicy: {{ k8s_image_pull_policy }}
           env:
             - name: REGISTRY_HOST
-              value: kube-registry.kube-system.svc.cluster.local
+              value: registry.{{ registry_namespace }}.svc.{{ cluster_name }}
             - name: REGISTRY_PORT
               value: "5000"
           ports:

roles/kubernetes-apps/registry/templates/registry-pv.yml.j2

@@ -1,17 +0,0 @@
-kind: PersistentVolume
-apiVersion: v1
-metadata:
-  name: kube-system-kube-registry-pv
-  labels:
-    kubernetes.io/cluster-service: "true"
-    addonmanager.kubernetes.io/mode: Reconcile
-spec:
-{% if pillar.get('cluster_registry_disk_type', '') == 'gce' %}
-  capacity:
-    storage: {{ pillar['cluster_registry_disk_size'] }}
-  accessModes:
-    - ReadWriteOnce
-  gcePersistentDisk:
-    pdName: "{{ pillar['cluster_registry_disk_name'] }}"
-    fsType: "ext4"
-{% endif %}

roles/kubernetes-apps/registry/templates/registry-pvc.yml.j2

@@ -1,14 +1,16 @@
-kind: PersistentVolumeClaim
+---
 apiVersion: v1
+kind: PersistentVolumeClaim
 metadata:
-  name: kube-registry-pvc
-  namespace: kube-system
+  name: registry-pvc
+  namespace: {{ registry_namespace }}
   labels:
     kubernetes.io/cluster-service: "true"
     addonmanager.kubernetes.io/mode: Reconcile
 spec:
   accessModes:
     - ReadWriteOnce
+  storageClassName: {{ registry_storage_class }}
   resources:
     requests:
-      storage: {{ pillar['cluster_registry_disk_size'] }}
+      storage: {{ registry_disk_size }}

roles/kubernetes-apps/registry/templates/registry-rc.yml.j2 → roles/kubernetes-apps/registry/templates/registry-rs.yml.j2

@@ -1,41 +1,48 @@
 ---
-apiVersion: v1
-kind: ReplicationController
+apiVersion: apps/v1
+kind: ReplicaSet
 metadata:
-  name: kube-registry-v{{ registry_image_tag }}
-  namespace: {{ system_namespace }}
+  name: registry-v{{ registry_image_tag }}
+  namespace: {{ registry_namespace }}
   labels:
-    k8s-app: kube-registry-upstream
+    k8s-app: registry
     version: v{{ registry_image_tag }}
     kubernetes.io/cluster-service: "true"
     addonmanager.kubernetes.io/mode: Reconcile
 spec:
   replicas: 1
   selector:
-    k8s-app: kube-registry-upstream
-    version: v{{ registry_image_tag }}
+    matchLabels:
+      k8s-app: registry
+      version: v{{ registry_image_tag }}
   template:
     metadata:
       labels:
-        k8s-app: kube-registry-upstream
+        k8s-app: registry
         version: v{{ registry_image_tag }}
         kubernetes.io/cluster-service: "true"
     spec:
       containers:
         - name: registry
           image: {{ registry_image_repo }}:{{ registry_image_tag }}
+          imagePullPolicy: {{ k8s_image_pull_policy }}
           env:
             - name: REGISTRY_HTTP_ADDR
               value: :5000
             - name: REGISTRY_STORAGE_FILESYSTEM_ROOTDIRECTORY
               value: /var/lib/registry
           volumeMounts:
-            - name: image-store
+            - name: registry-pvc
               mountPath: /var/lib/registry
           ports:
             - containerPort: 5000
               name: registry
               protocol: TCP
       volumes:
-        - name: image-store
+        - name: registry-pvc
+{% if registry_storage_class != none %}
+          persistentVolumeClaim:
+            claimName: registry-pvc
+{% else %}
           emptyDir: {}
+{% endif %}

roles/kubernetes-apps/registry/templates/registry-svc.yml.j2

@@ -2,17 +2,17 @@
 apiVersion: v1
 kind: Service
 metadata:
-  name: kube-registry
-  namespace: {{ system_namespace }}
+  name: registry
+  namespace: {{ registry_namespace }}
   labels:
-    k8s-app: kube-registry-upstream
+    k8s-app: registry
     kubernetes.io/cluster-service: "true"
     addonmanager.kubernetes.io/mode: Reconcile
     kubernetes.io/name: "KubeRegistry"
 spec:
   selector:
-    k8s-app: kube-registry-upstream
+    k8s-app: registry
   ports:
-  - name: registry
-    port: 5000
-    protocol: TCP
+    - name: registry
+      port: 5000
+      protocol: TCP

roles/kubernetes-apps/registry/templates/tls/README.md

@@ -1,116 +0,0 @@
-# Enable TLS for Kube-Registry 
-
-This document describes how to enable TLS for kube-registry. Before you start, please check if you have all the prerequisite:
-
-- A domain for kube-registry. Assuming it is ` myregistrydomain.com`.
-- Domain certificate and key. Assuming they are `domain.crt` and `domain.key`
-
-### Pack domain.crt and domain.key into a Secret 
-
-```console
-$ kubectl --namespace=kube-system create secret generic registry-tls-secret --from-file=domain.crt=domain.crt --from-file=domain.key=domain.key
-```
-
-### Run Registry
-
-Please be noted that this sample rc is using emptyDir as storage backend for simplicity. 
-
-<!-- BEGIN MUNGE: EXAMPLE registry-tls-rc.yaml -->
-```yaml
-apiVersion: v1
-kind: ReplicationController
-metadata:
-  name: kube-registry-v0
-  namespace: kube-system
-  labels:
-    k8s-app: kube-registry
-    version: v0
-#    kubernetes.io/cluster-service: "true"
-spec:
-  replicas: 1
-  selector:
-    k8s-app: kube-registry
-    version: v0
-  template:
-    metadata:
-      labels:
-        k8s-app: kube-registry
-        version: v0
-#        kubernetes.io/cluster-service: "true"
-    spec:
-      containers:
-      - name: registry
-        image: registry:2
-        resources:
-          # keep request = limit to keep this container in guaranteed class
-          limits:
-            cpu: 100m
-            memory: 100Mi
-          requests:
-            cpu: 100m
-            memory: 100Mi
-        env:
-        - name: REGISTRY_HTTP_ADDR
-          value: :5000
-        - name: REGISTRY_STORAGE_FILESYSTEM_ROOTDIRECTORY
-          value: /var/lib/registry
-        - name: REGISTRY_HTTP_TLS_CERTIFICATE
-          value: /certs/domain.crt
-        - name: REGISTRY_HTTP_TLS_KEY
-          value: /certs/domain.key
-        volumeMounts:
-        - name: image-store
-          mountPath: /var/lib/registry
-        - name: cert-dir
-          mountPath: /certs
-        ports:
-        - containerPort: 5000
-          name: registry
-          protocol: TCP
-      volumes:
-      - name: image-store
-        emptyDir: {}
-      - name: cert-dir
-        secret:
-          secretName: registry-tls-secret
-```
-<!-- END MUNGE: EXAMPLE registry-tls-rc.yaml -->
-
-### Expose External IP for Kube-Registry
-
-Modify the default kube-registry service to `LoadBalancer` type and point the DNS record of `myregistrydomain.com` to the service external ip. 
-
-<!-- BEGIN MUNGE: EXAMPLE registry-tls-svc.yaml -->
-```yaml
-apiVersion: v1
-kind: Service
-metadata:
-  name: kube-registry
-  namespace: kube-system
-  labels:
-    k8s-app: kube-registry
-#    kubernetes.io/cluster-service: "true"
-    kubernetes.io/name: "KubeRegistry"
-spec:
-  selector:
-    k8s-app: kube-registry
-  type: LoadBalancer
-  ports:
-  - name: registry
-    port: 5000
-    protocol: TCP
-```
-<!-- END MUNGE: EXAMPLE registry-tls-svc.yaml -->
-
-### To Verify 
-
-Now you should be able to access your kube-registry from another docker host. 
-```console
-docker pull busybox
-docker tag busybox myregistrydomain.com:5000/busybox
-docker push myregistrydomain.com:5000/busybox
-docker pull myregistrydomain.com:5000/busybox
-```
-
-
-[![Analytics](https://kubernetes-site.appspot.com/UA-36037335-10/GitHub/cluster/addons/registry/tls/README.md?pixel)]()

roles/kubernetes-apps/registry/templates/tls/registry-tls-rc.yml.j2

@@ -1,57 +0,0 @@
-apiVersion: v1
-kind: ReplicationController
-metadata:
-  name: kube-registry-v0
-  namespace: kube-system
-  labels:
-    k8s-app: kube-registry
-    version: v0
-#    kubernetes.io/cluster-service: "true"
-spec:
-  replicas: 1
-  selector:
-    k8s-app: kube-registry
-    version: v0
-  template:
-    metadata:
-      labels:
-        k8s-app: kube-registry
-        version: v0
-#        kubernetes.io/cluster-service: "true"
-    spec:
-      containers:
-      - name: registry
-        image: registry:2
-        resources:
-          # keep request = limit to keep this container in guaranteed class
-          limits:
-            cpu: 100m
-            memory: 100Mi
-          requests:
-            cpu: 100m
-            memory: 100Mi
-        env:
-        - name: REGISTRY_HTTP_ADDR
-          value: :5000
-        - name: REGISTRY_STORAGE_FILESYSTEM_ROOTDIRECTORY
-          value: /var/lib/registry
-        - name: REGISTRY_HTTP_TLS_CERTIFICATE
-          value: /certs/domain.crt
-        - name: REGISTRY_HTTP_TLS_KEY
-          value: /certs/domain.key
-        volumeMounts:
-        - name: image-store
-          mountPath: /var/lib/registry
-        - name: cert-dir
-          mountPath: /certs
-        ports:
-        - containerPort: 5000
-          name: registry
-          protocol: TCP
-      volumes:
-      - name: image-store
-        emptyDir: {}
-      - name: cert-dir
-        secret:
-          secretName: registry-tls-secret
-

roles/kubernetes-apps/registry/templates/tls/registry-tls-svc.yml.j2

@@ -1,17 +0,0 @@
-apiVersion: v1
-kind: Service
-metadata:
-  name: kube-registry
-  namespace: kube-system
-  labels:
-    k8s-app: kube-registry
-#    kubernetes.io/cluster-service: "true"
-    kubernetes.io/name: "KubeRegistry"
-spec:
-  selector:
-    k8s-app: kube-registry
-  type: LoadBalancer
-  ports:
-  - name: registry
-    port: 5000
-    protocol: TCP