|
|
# see roles/network_plugin/calico/defaults/main.yml
## With calico it is possible to distributed routes with border routers of the datacenter.
## Warning : enabling router peering will disable calico's default behavior ('node mesh').
## The subnets of each nodes will be distributed by the datacenter router
# peer_with_router: false
# Enables Internet connectivity from containers
# nat_outgoing: true
# add default ippool name
# calico_pool_name: "default-pool"
# add default ippool blockSize (defaults kube_network_node_prefix)
# calico_pool_blocksize: 24
# add default ippool CIDR (must be inside kube_pods_subnet, defaults to kube_pods_subnet otherwise)
# calico_pool_cidr: 1.2.3.4/5
# Global as_num (/calico/bgp/v1/global/as_num)
# global_as_num: "64512"
# You can set MTU value here. If left undefined or empty, it will
# not be specified in calico CNI config, so Calico will use built-in
# defaults. The value should be a number, not a string.
# calico_mtu: 1500
# Configure the MTU to use for workload interfaces and tunnels.
# - If Wireguard is enabled, set to your network MTU - 60
# - Otherwise, if VXLAN or BPF mode is enabled, set to your network MTU - 50
# - Otherwise, if IPIP is enabled, set to your network MTU - 20
# - Otherwise, if not using any encapsulation, set to your network MTU.
# calico_veth_mtu: 1440
# Advertise Cluster IPs
# calico_advertise_cluster_ips: true
# Choose data store type for calico: "etcd" or "kdd" (kubernetes datastore)
# calico_datastore: "etcd"
# Choose Calico iptables backend: "Legacy", "Auto" or "NFT"
# calico_iptables_backend: "Legacy"
# Use typha (only with kdd)
# typha_enabled: false
# Generate TLS certs for secure typha<->calico-node communication
# typha_secure: false
# Scaling typha: 1 replica per 100 nodes is adequate
# Number of typha replicas
# typha_replicas: 1
# Set max typha connections
# typha_max_connections_lower_limit: 300
# Set calico network backend: "bird", "vxlan" or "none"
# bird enable BGP routing, required for ipip mode.
# calico_network_backend: bird
# IP in IP and VXLAN is mutualy exclusive modes.
# set IP in IP encapsulation mode: "Always", "CrossSubnet", "Never"
# calico_ipip_mode: 'Always'
# set VXLAN encapsulation mode: "Always", "CrossSubnet", "Never"
# calico_vxlan_mode: 'Never'
# If you want to use non default IP_AUTODETECTION_METHOD for calico node set this option to one of:
# * can-reach=DESTINATION
# * interface=INTERFACE-REGEX
# see https://docs.projectcalico.org/reference/node/configuration
# calico_ip_auto_method: "interface=eth.*"
# Choose the iptables insert mode for Calico: "Insert" or "Append".
# calico_felix_chaininsertmode: Insert
# If you want use the default route interface when you use multiple interface with dynamique route (iproute2)
# see https://docs.projectcalico.org/reference/node/configuration : FELIX_DEVICEROUTESOURCEADDRESS
# calico_use_default_route_src_ipaddr: false
|
