You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

128 lines
4.0 KiB

6 years ago
contiv network support (#1914) * Add Contiv support Contiv is a network plugin for Kubernetes and Docker. It supports vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies, multiple networks and bridging pods onto physical networks. * Update contiv version to 1.1.4 Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config. * Load openvswitch module to workaround on CentOS7.4 * Set contiv cni version to 0.1.0 Correct contiv CNI version to 0.1.0. * Use kube_apiserver_endpoint for K8S_API_SERVER Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks to a available endpoint no matter if there's a loadbalancer or not. * Make contiv use its own etcd Before this commit, contiv is using a etcd proxy mode to k8s etcd, this work fine when the etcd hosts are co-located with contiv etcd proxy, however the k8s peering certs are only in etcd group, as a result the etcd-proxy is not able to peering with the k8s etcd on etcd group, plus the netplugin is always trying to find the etcd endpoint on localhost, this will cause problem for all netplugins not runnign on etcd group nodes. This commit make contiv uses its own etcd, separate from k8s one. on kube-master nodes (where net-master runs), it will run as leader mode and on all rest nodes it will run as proxy mode. * Use cp instead of rsync to copy cni binaries Since rsync has been removed from hyperkube, this commit changes it to use cp instead. * Make contiv-etcd able to run on master nodes * Add rbac_enabled flag for contiv pods * Add contiv into CNI network plugin lists * migrate contiv test to tests/files Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> * Add required rules for contiv netplugin * Better handling json return of fwdMode * Make contiv etcd port configurable * Use default var instead of templating * roles/download/defaults/main.yml: use contiv 1.1.7 Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
7 years ago
contiv network support (#1914) * Add Contiv support Contiv is a network plugin for Kubernetes and Docker. It supports vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies, multiple networks and bridging pods onto physical networks. * Update contiv version to 1.1.4 Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config. * Load openvswitch module to workaround on CentOS7.4 * Set contiv cni version to 0.1.0 Correct contiv CNI version to 0.1.0. * Use kube_apiserver_endpoint for K8S_API_SERVER Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks to a available endpoint no matter if there's a loadbalancer or not. * Make contiv use its own etcd Before this commit, contiv is using a etcd proxy mode to k8s etcd, this work fine when the etcd hosts are co-located with contiv etcd proxy, however the k8s peering certs are only in etcd group, as a result the etcd-proxy is not able to peering with the k8s etcd on etcd group, plus the netplugin is always trying to find the etcd endpoint on localhost, this will cause problem for all netplugins not runnign on etcd group nodes. This commit make contiv uses its own etcd, separate from k8s one. on kube-master nodes (where net-master runs), it will run as leader mode and on all rest nodes it will run as proxy mode. * Use cp instead of rsync to copy cni binaries Since rsync has been removed from hyperkube, this commit changes it to use cp instead. * Make contiv-etcd able to run on master nodes * Add rbac_enabled flag for contiv pods * Add contiv into CNI network plugin lists * migrate contiv test to tests/files Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> * Add required rules for contiv netplugin * Better handling json return of fwdMode * Make contiv etcd port configurable * Use default var instead of templating * roles/download/defaults/main.yml: use contiv 1.1.7 Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
7 years ago
contiv network support (#1914) * Add Contiv support Contiv is a network plugin for Kubernetes and Docker. It supports vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies, multiple networks and bridging pods onto physical networks. * Update contiv version to 1.1.4 Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config. * Load openvswitch module to workaround on CentOS7.4 * Set contiv cni version to 0.1.0 Correct contiv CNI version to 0.1.0. * Use kube_apiserver_endpoint for K8S_API_SERVER Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks to a available endpoint no matter if there's a loadbalancer or not. * Make contiv use its own etcd Before this commit, contiv is using a etcd proxy mode to k8s etcd, this work fine when the etcd hosts are co-located with contiv etcd proxy, however the k8s peering certs are only in etcd group, as a result the etcd-proxy is not able to peering with the k8s etcd on etcd group, plus the netplugin is always trying to find the etcd endpoint on localhost, this will cause problem for all netplugins not runnign on etcd group nodes. This commit make contiv uses its own etcd, separate from k8s one. on kube-master nodes (where net-master runs), it will run as leader mode and on all rest nodes it will run as proxy mode. * Use cp instead of rsync to copy cni binaries Since rsync has been removed from hyperkube, this commit changes it to use cp instead. * Make contiv-etcd able to run on master nodes * Add rbac_enabled flag for contiv pods * Add contiv into CNI network plugin lists * migrate contiv test to tests/files Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> * Add required rules for contiv netplugin * Better handling json return of fwdMode * Make contiv etcd port configurable * Use default var instead of templating * roles/download/defaults/main.yml: use contiv 1.1.7 Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
7 years ago
contiv network support (#1914) * Add Contiv support Contiv is a network plugin for Kubernetes and Docker. It supports vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies, multiple networks and bridging pods onto physical networks. * Update contiv version to 1.1.4 Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config. * Load openvswitch module to workaround on CentOS7.4 * Set contiv cni version to 0.1.0 Correct contiv CNI version to 0.1.0. * Use kube_apiserver_endpoint for K8S_API_SERVER Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks to a available endpoint no matter if there's a loadbalancer or not. * Make contiv use its own etcd Before this commit, contiv is using a etcd proxy mode to k8s etcd, this work fine when the etcd hosts are co-located with contiv etcd proxy, however the k8s peering certs are only in etcd group, as a result the etcd-proxy is not able to peering with the k8s etcd on etcd group, plus the netplugin is always trying to find the etcd endpoint on localhost, this will cause problem for all netplugins not runnign on etcd group nodes. This commit make contiv uses its own etcd, separate from k8s one. on kube-master nodes (where net-master runs), it will run as leader mode and on all rest nodes it will run as proxy mode. * Use cp instead of rsync to copy cni binaries Since rsync has been removed from hyperkube, this commit changes it to use cp instead. * Make contiv-etcd able to run on master nodes * Add rbac_enabled flag for contiv pods * Add contiv into CNI network plugin lists * migrate contiv test to tests/files Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> * Add required rules for contiv netplugin * Better handling json return of fwdMode * Make contiv etcd port configurable * Use default var instead of templating * roles/download/defaults/main.yml: use contiv 1.1.7 Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
7 years ago
contiv network support (#1914) * Add Contiv support Contiv is a network plugin for Kubernetes and Docker. It supports vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies, multiple networks and bridging pods onto physical networks. * Update contiv version to 1.1.4 Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config. * Load openvswitch module to workaround on CentOS7.4 * Set contiv cni version to 0.1.0 Correct contiv CNI version to 0.1.0. * Use kube_apiserver_endpoint for K8S_API_SERVER Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks to a available endpoint no matter if there's a loadbalancer or not. * Make contiv use its own etcd Before this commit, contiv is using a etcd proxy mode to k8s etcd, this work fine when the etcd hosts are co-located with contiv etcd proxy, however the k8s peering certs are only in etcd group, as a result the etcd-proxy is not able to peering with the k8s etcd on etcd group, plus the netplugin is always trying to find the etcd endpoint on localhost, this will cause problem for all netplugins not runnign on etcd group nodes. This commit make contiv uses its own etcd, separate from k8s one. on kube-master nodes (where net-master runs), it will run as leader mode and on all rest nodes it will run as proxy mode. * Use cp instead of rsync to copy cni binaries Since rsync has been removed from hyperkube, this commit changes it to use cp instead. * Make contiv-etcd able to run on master nodes * Add rbac_enabled flag for contiv pods * Add contiv into CNI network plugin lists * migrate contiv test to tests/files Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> * Add required rules for contiv netplugin * Better handling json return of fwdMode * Make contiv etcd port configurable * Use default var instead of templating * roles/download/defaults/main.yml: use contiv 1.1.7 Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
7 years ago
contiv network support (#1914) * Add Contiv support Contiv is a network plugin for Kubernetes and Docker. It supports vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies, multiple networks and bridging pods onto physical networks. * Update contiv version to 1.1.4 Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config. * Load openvswitch module to workaround on CentOS7.4 * Set contiv cni version to 0.1.0 Correct contiv CNI version to 0.1.0. * Use kube_apiserver_endpoint for K8S_API_SERVER Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks to a available endpoint no matter if there's a loadbalancer or not. * Make contiv use its own etcd Before this commit, contiv is using a etcd proxy mode to k8s etcd, this work fine when the etcd hosts are co-located with contiv etcd proxy, however the k8s peering certs are only in etcd group, as a result the etcd-proxy is not able to peering with the k8s etcd on etcd group, plus the netplugin is always trying to find the etcd endpoint on localhost, this will cause problem for all netplugins not runnign on etcd group nodes. This commit make contiv uses its own etcd, separate from k8s one. on kube-master nodes (where net-master runs), it will run as leader mode and on all rest nodes it will run as proxy mode. * Use cp instead of rsync to copy cni binaries Since rsync has been removed from hyperkube, this commit changes it to use cp instead. * Make contiv-etcd able to run on master nodes * Add rbac_enabled flag for contiv pods * Add contiv into CNI network plugin lists * migrate contiv test to tests/files Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> * Add required rules for contiv netplugin * Better handling json return of fwdMode * Make contiv etcd port configurable * Use default var instead of templating * roles/download/defaults/main.yml: use contiv 1.1.7 Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
7 years ago
6 years ago
contiv network support (#1914) * Add Contiv support Contiv is a network plugin for Kubernetes and Docker. It supports vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies, multiple networks and bridging pods onto physical networks. * Update contiv version to 1.1.4 Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config. * Load openvswitch module to workaround on CentOS7.4 * Set contiv cni version to 0.1.0 Correct contiv CNI version to 0.1.0. * Use kube_apiserver_endpoint for K8S_API_SERVER Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks to a available endpoint no matter if there's a loadbalancer or not. * Make contiv use its own etcd Before this commit, contiv is using a etcd proxy mode to k8s etcd, this work fine when the etcd hosts are co-located with contiv etcd proxy, however the k8s peering certs are only in etcd group, as a result the etcd-proxy is not able to peering with the k8s etcd on etcd group, plus the netplugin is always trying to find the etcd endpoint on localhost, this will cause problem for all netplugins not runnign on etcd group nodes. This commit make contiv uses its own etcd, separate from k8s one. on kube-master nodes (where net-master runs), it will run as leader mode and on all rest nodes it will run as proxy mode. * Use cp instead of rsync to copy cni binaries Since rsync has been removed from hyperkube, this commit changes it to use cp instead. * Make contiv-etcd able to run on master nodes * Add rbac_enabled flag for contiv pods * Add contiv into CNI network plugin lists * migrate contiv test to tests/files Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> * Add required rules for contiv netplugin * Better handling json return of fwdMode * Make contiv etcd port configurable * Use default var instead of templating * roles/download/defaults/main.yml: use contiv 1.1.7 Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
7 years ago
6 years ago
contiv network support (#1914) * Add Contiv support Contiv is a network plugin for Kubernetes and Docker. It supports vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies, multiple networks and bridging pods onto physical networks. * Update contiv version to 1.1.4 Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config. * Load openvswitch module to workaround on CentOS7.4 * Set contiv cni version to 0.1.0 Correct contiv CNI version to 0.1.0. * Use kube_apiserver_endpoint for K8S_API_SERVER Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks to a available endpoint no matter if there's a loadbalancer or not. * Make contiv use its own etcd Before this commit, contiv is using a etcd proxy mode to k8s etcd, this work fine when the etcd hosts are co-located with contiv etcd proxy, however the k8s peering certs are only in etcd group, as a result the etcd-proxy is not able to peering with the k8s etcd on etcd group, plus the netplugin is always trying to find the etcd endpoint on localhost, this will cause problem for all netplugins not runnign on etcd group nodes. This commit make contiv uses its own etcd, separate from k8s one. on kube-master nodes (where net-master runs), it will run as leader mode and on all rest nodes it will run as proxy mode. * Use cp instead of rsync to copy cni binaries Since rsync has been removed from hyperkube, this commit changes it to use cp instead. * Make contiv-etcd able to run on master nodes * Add rbac_enabled flag for contiv pods * Add contiv into CNI network plugin lists * migrate contiv test to tests/files Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> * Add required rules for contiv netplugin * Better handling json return of fwdMode * Make contiv etcd port configurable * Use default var instead of templating * roles/download/defaults/main.yml: use contiv 1.1.7 Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
7 years ago
6 years ago
contiv network support (#1914) * Add Contiv support Contiv is a network plugin for Kubernetes and Docker. It supports vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies, multiple networks and bridging pods onto physical networks. * Update contiv version to 1.1.4 Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config. * Load openvswitch module to workaround on CentOS7.4 * Set contiv cni version to 0.1.0 Correct contiv CNI version to 0.1.0. * Use kube_apiserver_endpoint for K8S_API_SERVER Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks to a available endpoint no matter if there's a loadbalancer or not. * Make contiv use its own etcd Before this commit, contiv is using a etcd proxy mode to k8s etcd, this work fine when the etcd hosts are co-located with contiv etcd proxy, however the k8s peering certs are only in etcd group, as a result the etcd-proxy is not able to peering with the k8s etcd on etcd group, plus the netplugin is always trying to find the etcd endpoint on localhost, this will cause problem for all netplugins not runnign on etcd group nodes. This commit make contiv uses its own etcd, separate from k8s one. on kube-master nodes (where net-master runs), it will run as leader mode and on all rest nodes it will run as proxy mode. * Use cp instead of rsync to copy cni binaries Since rsync has been removed from hyperkube, this commit changes it to use cp instead. * Make contiv-etcd able to run on master nodes * Add rbac_enabled flag for contiv pods * Add contiv into CNI network plugin lists * migrate contiv test to tests/files Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> * Add required rules for contiv netplugin * Better handling json return of fwdMode * Make contiv etcd port configurable * Use default var instead of templating * roles/download/defaults/main.yml: use contiv 1.1.7 Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
7 years ago
6 years ago
contiv network support (#1914) * Add Contiv support Contiv is a network plugin for Kubernetes and Docker. It supports vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies, multiple networks and bridging pods onto physical networks. * Update contiv version to 1.1.4 Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config. * Load openvswitch module to workaround on CentOS7.4 * Set contiv cni version to 0.1.0 Correct contiv CNI version to 0.1.0. * Use kube_apiserver_endpoint for K8S_API_SERVER Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks to a available endpoint no matter if there's a loadbalancer or not. * Make contiv use its own etcd Before this commit, contiv is using a etcd proxy mode to k8s etcd, this work fine when the etcd hosts are co-located with contiv etcd proxy, however the k8s peering certs are only in etcd group, as a result the etcd-proxy is not able to peering with the k8s etcd on etcd group, plus the netplugin is always trying to find the etcd endpoint on localhost, this will cause problem for all netplugins not runnign on etcd group nodes. This commit make contiv uses its own etcd, separate from k8s one. on kube-master nodes (where net-master runs), it will run as leader mode and on all rest nodes it will run as proxy mode. * Use cp instead of rsync to copy cni binaries Since rsync has been removed from hyperkube, this commit changes it to use cp instead. * Make contiv-etcd able to run on master nodes * Add rbac_enabled flag for contiv pods * Add contiv into CNI network plugin lists * migrate contiv test to tests/files Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> * Add required rules for contiv netplugin * Better handling json return of fwdMode * Make contiv etcd port configurable * Use default var instead of templating * roles/download/defaults/main.yml: use contiv 1.1.7 Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
7 years ago
6 years ago
contiv network support (#1914) * Add Contiv support Contiv is a network plugin for Kubernetes and Docker. It supports vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies, multiple networks and bridging pods onto physical networks. * Update contiv version to 1.1.4 Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config. * Load openvswitch module to workaround on CentOS7.4 * Set contiv cni version to 0.1.0 Correct contiv CNI version to 0.1.0. * Use kube_apiserver_endpoint for K8S_API_SERVER Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks to a available endpoint no matter if there's a loadbalancer or not. * Make contiv use its own etcd Before this commit, contiv is using a etcd proxy mode to k8s etcd, this work fine when the etcd hosts are co-located with contiv etcd proxy, however the k8s peering certs are only in etcd group, as a result the etcd-proxy is not able to peering with the k8s etcd on etcd group, plus the netplugin is always trying to find the etcd endpoint on localhost, this will cause problem for all netplugins not runnign on etcd group nodes. This commit make contiv uses its own etcd, separate from k8s one. on kube-master nodes (where net-master runs), it will run as leader mode and on all rest nodes it will run as proxy mode. * Use cp instead of rsync to copy cni binaries Since rsync has been removed from hyperkube, this commit changes it to use cp instead. * Make contiv-etcd able to run on master nodes * Add rbac_enabled flag for contiv pods * Add contiv into CNI network plugin lists * migrate contiv test to tests/files Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> * Add required rules for contiv netplugin * Better handling json return of fwdMode * Make contiv etcd port configurable * Use default var instead of templating * roles/download/defaults/main.yml: use contiv 1.1.7 Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
7 years ago
6 years ago
contiv network support (#1914) * Add Contiv support Contiv is a network plugin for Kubernetes and Docker. It supports vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies, multiple networks and bridging pods onto physical networks. * Update contiv version to 1.1.4 Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config. * Load openvswitch module to workaround on CentOS7.4 * Set contiv cni version to 0.1.0 Correct contiv CNI version to 0.1.0. * Use kube_apiserver_endpoint for K8S_API_SERVER Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks to a available endpoint no matter if there's a loadbalancer or not. * Make contiv use its own etcd Before this commit, contiv is using a etcd proxy mode to k8s etcd, this work fine when the etcd hosts are co-located with contiv etcd proxy, however the k8s peering certs are only in etcd group, as a result the etcd-proxy is not able to peering with the k8s etcd on etcd group, plus the netplugin is always trying to find the etcd endpoint on localhost, this will cause problem for all netplugins not runnign on etcd group nodes. This commit make contiv uses its own etcd, separate from k8s one. on kube-master nodes (where net-master runs), it will run as leader mode and on all rest nodes it will run as proxy mode. * Use cp instead of rsync to copy cni binaries Since rsync has been removed from hyperkube, this commit changes it to use cp instead. * Make contiv-etcd able to run on master nodes * Add rbac_enabled flag for contiv pods * Add contiv into CNI network plugin lists * migrate contiv test to tests/files Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> * Add required rules for contiv netplugin * Better handling json return of fwdMode * Make contiv etcd port configurable * Use default var instead of templating * roles/download/defaults/main.yml: use contiv 1.1.7 Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
7 years ago
  1. ---
  2. # This manifest installs contiv-netplugin container, as well
  3. # as the Contiv CNI plugins and network config on
  4. # each master and worker node in a Kubernetes cluster.
  5. kind: DaemonSet
  6. apiVersion: apps/v1
  7. metadata:
  8. name: contiv-netplugin
  9. namespace: kube-system
  10. labels:
  11. k8s-app: contiv-netplugin
  12. spec:
  13. selector:
  14. matchLabels:
  15. k8s-app: contiv-netplugin
  16. updateStrategy:
  17. type: RollingUpdate
  18. template:
  19. metadata:
  20. labels:
  21. k8s-app: contiv-netplugin
  22. spec:
  23. priorityClassName: system-node-critical
  24. hostNetwork: true
  25. dnsPolicy: ClusterFirstWithHostNet
  26. hostPID: true
  27. tolerations:
  28. - operator: Exists
  29. serviceAccountName: contiv-netplugin
  30. initContainers:
  31. - name: contiv-netplugin-init
  32. image: {{ contiv_init_image_repo }}:{{ contiv_init_image_tag }}
  33. env:
  34. - name: CONTIV_ROLE
  35. value: netplugin
  36. - name: CONTIV_MODE
  37. value: kubernetes
  38. - name: CONTIV_K8S_CONFIG
  39. valueFrom:
  40. configMapKeyRef:
  41. name: contiv-config
  42. key: contiv_k8s_config
  43. - name: CONTIV_CNI_CONFIG
  44. valueFrom:
  45. configMapKeyRef:
  46. name: contiv-config
  47. key: contiv_cni_config
  48. volumeMounts:
  49. - mountPath: /var/contiv
  50. name: var-contiv
  51. readOnly: false
  52. - mountPath: /etc/cni/net.d/
  53. name: etc-cni-dir
  54. readOnly: false
  55. - name: contiv-cni
  56. image: {{ contiv_image_repo }}:{{ contiv_version }}
  57. command: ["cp", "/contiv/bin/contivk8s", "/opt/cni/bin/contivk8s"]
  58. volumeMounts:
  59. - mountPath: /opt/cni/bin
  60. name: cni-bin-dir
  61. readOnly: false
  62. containers:
  63. # Runs netplugin container on each Kubernetes node. This
  64. # container programs network policy and routes on each
  65. # host.
  66. - name: contiv-netplugin
  67. image: {{ contiv_image_repo }}:{{ contiv_image_tag }}
  68. env:
  69. - name: VLAN_IF
  70. value: {{ contiv_vlan_interface }}
  71. - name: CONTIV_NETPLUGIN_VLAN_UPLINKS
  72. value: {{ contiv_vlan_interface }}
  73. - name: CONTIV_NETPLUGIN_VXLAN_PORT
  74. value: "{{ contiv_vxlan_port }}"
  75. - name: CONTIV_ROLE
  76. value: netplugin
  77. - name: CONTIV_NETPLUGIN_MODE
  78. value: kubernetes
  79. - name: CONTIV_NETPLUGIN_VTEP_IP
  80. valueFrom:
  81. fieldRef:
  82. fieldPath: status.podIP
  83. - name: CONTIV_NETPLUGIN_ETCD_ENDPOINTS
  84. valueFrom:
  85. configMapKeyRef:
  86. name: contiv-config
  87. key: contiv_etcd
  88. - name: CONTIV_NETPLUGIN_FORWARD_MODE
  89. valueFrom:
  90. configMapKeyRef:
  91. name: contiv-config
  92. key: contiv_fwdmode
  93. - name: CONTIV_NETPLUGIN_NET_MODE
  94. valueFrom:
  95. configMapKeyRef:
  96. name: contiv-config
  97. key: contiv_netmode
  98. - name: CONTIV_NETPLUGIN_LOG_LEVEL
  99. valueFrom:
  100. configMapKeyRef:
  101. name: contiv-config
  102. key: contiv_netplugin_loglevel
  103. resources:
  104. requests:
  105. cpu: 250m
  106. securityContext:
  107. privileged: true
  108. volumeMounts:
  109. - mountPath: /var/run
  110. name: var-run
  111. readOnly: false
  112. - mountPath: /var/contiv
  113. name: var-contiv
  114. readOnly: false
  115. volumes:
  116. # Used by contiv-netplugin
  117. - name: var-run
  118. hostPath:
  119. path: /var/run
  120. - name: var-contiv
  121. hostPath:
  122. path: /var/contiv
  123. - name: cni-bin-dir
  124. hostPath:
  125. path: /opt/cni/bin
  126. - name: etc-cni-dir
  127. hostPath:
  128. path: /etc/cni/net.d/